Portable, versatile edge banding machine designed for onsite and workshop use. Two operating modes let you use the unit as a bench machine for small workpieces or as a tablemounted system for larger panels. Seals straight edges, curves, and arched plates with no practical limit on border length. Key benefits Portable and adaptable: switch between bench and tablemounted setups to handle small repairs, production runs, or large panel work without being limited by location. Strong, reliable bonding: unique doubleside gluing applies adhesive evenly to both the banding strip and the panel edge for double bonding that reduces loosening and improves longterm stability. Long run time per fill: 1000 ml glue tank supports low and medium temperature adhesives and lets you complete multiple edging jobs after a single heat cycle. Precise control and consistent finish: adjustable feed speed from 0 to 6 m/min ensures even glue distribution and a smoother, more uniform appearance across different strip and board types. Fast heatup: compatible glue heats to 170 to 190 C (338 to 374 F) in about 5 to 10 minutes so work can begin quickly. Core functions and compatibility Modes: bench small wooden seat edge banding or large table moving edge banding. Edge types: straight edges, curved edges, and arced panels. Glue system: doubleside coating for both strip and panel surfaces. Adhesives: supports low and medium temperature hotmelt glues in the 170 to 190 C range. Speed range: 0 to 6 m/min for varied materials and strip widths. Practical applications Cabinet and kitchen work: apply consistent edging to cabinet doors and drawer fronts, including curved or arched profiles. Onsite repairs and installations: bring the machine to the job site to edge panels without transporting cabinetry. Workshop production: use tablemounted mode for higher throughput on large panels or bench mode for small batches and sample work. Technical highlights Glue tank capacity: 1000 ml Heating time: approximately 5 to 10 minutes Operating temperature: 170 to 190 C (338 to 374 F) Adjustable edge banding speed: 0 to 6 m/min This machine is intended for furniture manufacturing and panel edging tasks where portability, reliable adhesion, and consistent finish are required.