Replacement oven igniter AR403 compatible with WB2X9154 AP2014008 PS243425 Product overview This directfit oven igniter is designed to worn or failed igniters in compatible gas ranges. It restores reliable ignition so your oven lights properly and reaches operating temperature as intended. The part is labeled AR403 and listed as fit for WB2X9154 AP2014008 PS243425. Key benefits Direct compatibility: Made to fit models listed as WB2X9154 AP2014008 PS243425 for a straightforward replacement without modification. Restores reliable ignition: Replaces a failing igniter to help the burner light consistently and reduce repeated attempts to start the oven. Simple installation: Directfit design and standard connection points allow for a quick swap using basic hand tools. Durable construction: Built for regular oven conditions to provide consistent heating performance during normal use. Cost effective : Allows targeted replacement of the igniter rather than replacing the entire appliance control system. Function and performance Function: Heats to the required temperature to ignite the gas flow in the oven burner assembly. Performance: Designed to reach ignition temperature within the normal cycle time for compatible gas ranges to enable burner ignition under typical operating conditions. Connections: Fits standard mounting and electrical attachment points on listed compatible models. Compatibility Compatible with models listed as WB2X9154 AP2014008 PS243425 and labeled AR403. Intended as a direct replacement for the listed part numbers. Confirm model numbers on your appliance before . Typical applications and use scenarios Home oven : a cracked or weak igniter that no longer lights the oven reliably, restoring normal cooking function. Rental property maintenance: Keep rental kitchens operational by replacing a failed igniter quickly between tenants to minimize downtime. Appliance refurbishment: Use when rebuilding or refurbishing gas ranges to ensure ignition components are current and functioning. Installation notes only when the appliance is disconnected from gas and power and after following all manufacturer safety instructions. Installation typically involves removing the oven access panel, disconnecting the old igniter, mounting the replacement part, and reconnecting electrical terminals. If unsure about installation, consult a qualified technician. What to check before ordering Verify the part number on your original igniter matches one of these numbers: WB2X9154 AP2014008 PS243425 or AR403. Confirm the physical mounting and electrical connector types match your oven. This replacement igniter provides a practical way to restore ignition performance in compatible gas ranges while keeping time and effort to a minimum.