Split CV Boot Kit for Drive Shaft and Maintenance A practical split CV boot designed for DIY mechanics and workshop use. The fulllength tongue and groove split allows the boot to be fitted without removing the drive shaft in many applications. Once positioned, the split joint is bonded with a suitable rubber adhesive to form a durable, sealed joint. Key benefits Saves time and effort by allowing installation around the shaft without full disassembly. Protects CV joints from oil, grease, dirt, and road debris to extend component life. Durable neoprene construction resists abrasion, tear, and impact for reliable service under tough conditions. Includes fitting pliers and stainless steel ear clamps for a secure installation. Features and specifications Design: fulllength tongue and groove split for easy retrofit installation. Material: neoprene offering resistance to oil, grease, abrasion, grit, extremes of temperature, and tear and impact damage. Fit: universalstyle boot suitable for a wide range of drive shafts and CV joint sizes; confirm dimensions against the application before fitting. Joint method: split joint is intended to be bonded with a suitable rubber adhesive to create a sealed, longlasting connection. Package contents: 1 CV boot, 1 fitting pliers, 2 stainless steel ear clamps. Installation overview Slide the split boot into position around the joint. Bond the split joint with an appropriate rubber adhesive and allow to cure. Fit the ear clamps using the supplied pliers and tighten to secure the boot in place. Check for proper seal and correct clamp tension before finishing. Use scenarios Quick workshop when a torn CV boot is leaking grease and a full shaft removal is not practical. Preventive maintenance during routine service to worn boots and protect the joint from contamination. Emergency roadside replacement to stop grease loss until a full can be completed. What makes this kit useful The split design and included pliers make installation faster and more accessible for nonspecialist fitters. Neoprene material maintains flexibility across a wide temperature range while resisting common automotive contaminants. Supplied stainless steel ear clamps provide secure fastening for roadready performance. Check fitment dimensions and select a suitable rubber adhesive before installation to ensure the correct fit and a reliable seal.