Solar Alarm Wall Light with Motion Sensor and Remote Key benefits Combined security lighting and audible alarm for visible deterrence and quick notification. Three operating modes let you choose between energysaving lighting, motiontriggered alarm, or continuous alarm monitoring. Solar powered with a builtin rechargeable battery for installation without wiring and reliable overnight operation after daytime charging. Durable ABS housing and IP55 water resistance for outdoor use in a wide range of temperatures. What it does Lighting and alarm in one unit: 24 power white LEDs for night illumination and 6 red flashing LEDs for visible alarm signaling. The unit also emits a 129 dB warning tone when triggered. Motion detection: PIR sensor with a 120 degree detection angle and a sensing range of 5 to 8 meters activates lights and alarm on motion. Remote control and button operation provide simple onetouch switching between modes. Three working modes Mode 1 Normal lighting mode: Charges during the day. At night, the unit provides basic lighting. When motion is detected, the white LEDs turn on and remain until the area is clear, then to standby. Mode 2 Induction alarm mode: At night the indicator flashes red. When motion is detected the red LEDs flash and the alarm sounds. The alarm stops automatically after about 1 minute and the unit returns to standby. The unit will not alarm in daylight. Mode 3 24 hours alarm mode: Alarm mode is active at all times. When motion is detected the red LEDs flash and the alarm sounds. The alarm stops about 1 minute after movement stops and then returns to alarm readiness. Technical specifications Lamp beads: 30 LED total 24 white LEDs and 6 red LEDs Battery: Builtin 1200 mAh rechargeable battery Charging: Solar charging, working voltage 5 V Charging time: 6 to 8 hours of sunlight for a full charge Material: ABS plastic Waterproof rating: IP55 Operating temperature: 30 C to 60 C Sensor angle and range: PIR motion sensor, 120 degree angle, 5 to 8 meter range Alarm volume: 129 dB Controls: Power button and included remote control Package contents 1 Solar Alarm Wall Light 1 Remote Control Typical use scenarios Home entry and driveway: Install above a doorway or garage to provide bright white lighting at night and alarm notification if someone approaches after dark. Farm or outbuilding protection: Use at sheds or barns where solar wiring is impractical; motiontriggered alarm and flashing red LEDs provide a strong deterrent to intruders. Yard and perimeter monitoring: Mount along fences or walkways to alert you to unexpected movement and to illuminate pathways for safer access. Installation and operation notes Mount in a location that receives direct sunlight for 6 to 8 hours daily to ensure full charge. Choose height and angle to maximize the PIR sensor coverage of the area to be protected. Use the remote control or the power button to select the desired working mode before first use. This unit combines practical night lighting with audible and visual alarm functions for flexible outdoor security applications.