Replacement Kit: 10 shear pins and 10 split pins for use with various model snowblowers. A practical set of spare fasteners that lets you restore auger and impeller connections quickly when a shear pin breaks or during routine maintenance. Key benefits Protects critical drive components by providing a predictable fail point when the auger encounters a hard obstruction. Replacing a broken shear pin is faster and less expensive than repairing bent shafts or gearboxes. Keeps your snowblower running with minimal downtime. Having 10 shear pins and 10 split pins on hand allows multiple field repairs and seasonal maintenance without searching for parts. Simple to install and using common hand tools, so you can perform repairs on the spot and get back to work. What the kit does Shear pins act as sacrificial fasteners between the engine drive and the auger or impeller. If the auger jams, the pin will shear to prevent more serious damage. Split pins secure the shear pin in place during operation and make replacement straightforward. Product highlights Quantity: 10 shear pins and 10 split pins included. Intended use: Replacement fasteners for a wide range of snowblower models. Design: Precisionformed replacement pins intended to match standard replacement dimensions. Verify fit with your machine original parts before installation. Performance: Allows predictable failure under overload to protect gear components and enable straightforward replacement. Compatibility and fit Intended as replacement shear and split pins for various snowblower models. Confirm compatibility by comparing the shape and dimensions of the pins in this kit with the pins currently used in your machine before installation. Typical use scenarios 1. Field after a jam: If the auger strikes packed ice or a hidden obstacle, the broken shear pin and its split pin from the kit to resume operation quickly. 2. Seasonal maintenance: worn or corroded pins during winter prep to reduce the risk of failure during heavy use. 3. Onsite readiness for rental or fleet equipment: Keep spares in a service kit for rental units or multiple machines to minimize downtime when a shear pin shears. Installation tips Turn off the engine and disconnect spark plug or power source before performing any maintenance. Remove the broken pin, insert the replacement shear pin, and secure it with a split pin. Use pliers or a punch and hammer as needed to seat the parts properly. Always confirm the replacement pin matches the original part dimensions before operating the machine. Contents of the package 10 shear pins 10 split pins Note Verify the pin size and fit with your equipment prior to installation to ensure proper function. This kit is intended as replacement hardware for many snowblower models and is not a universal fit for every unit.