Product overview A digital tension meter designed for accurate measurement of wire mesh and steel mesh tension, especially suited for screen printing and screen stencil applications. The instrument provides clear digital readouts to reduce reading and tactile errors during production and quality control. Key benefits Accurate, repeatable measurements: Measurement range covers 0 to 60 N/cm for general wire mesh and steel mesh tension checks, while the display focuses on 0 to 50 N/cm for screen printing and stencil work. Clear digital readout: LCD digital display reduces reading errors compared with analog gauges and subjective tactile assessment. Fine resolution and predictable error: Resolution 0.1 N/cm with a fiducial error of 5 percent supports consistent process control and inspection. Reduces human error: Helps standardize tension measurements across operators and production runs, improving consistency in finished screens and stencils. Main specifications Measurement range: 0 to 60 N/cm for general wire mesh and steel mesh tension measurement Display range: 0 to 50 N/cm, optimized for screen printing and screen stencil measurement Resolution: 0.1 N/cm Fiducial error: 5 percent Display: LCD digital display to eliminate reading errors Performance and compatibility Function: Measures tension on wire mesh, steel mesh, and screen printing stencils to support setup, maintenance, and quality control. Compatibility: Suitable for a wide range of mesh types used in screen printing and industrial mesh production. Actual readings may vary by mesh construction and the condition of the mesh mounting equipment. Performance note: Data published under test conditions used a Swiss thick gauze. Concrete results depend on the quality of the mesh making machine. With good quality mesh making equipment, conversion rates can be improved. Practical use scenarios Screen printing setup: Verify and adjust stencil tension to ensure consistent ink transfer and print registration across production runs. Quality control in mesh production: Inspect steel mesh and wire mesh tension to detect uneven tension or defects before assembly or shipment. Routine maintenance: Periodically check screen frames and mounted stencils to detect tension loss and schedule retensioning to maintain print quality. How it solves common problems Replaces subjective handfeel methods with objective digital readings, reducing variability between operators. Enables documented, repeatable measurements for process control and traceability. Helps prevent printing defects caused by under or overtensioned stencils, reducing waste and rework. Usage tips Use the device within the specified measurement and display ranges for most accurate results. Compare readings against known reference meshes or calibrated samples when establishing process tolerances. Note that measured values depend on mesh type and the mesh making machine; validate readings under actual production conditions. This instrument provides a straightforward, digital approach to mesh tension measurement, supporting consistent production and quality control for screen printing and mesh fabrication.