This is a 1piece Serial ATA SATA 4 Pin IDE Molex to 1/2/3 of 15 Pin HDD Power Adapter Cable with a 10 cm length. It provides a simple, plugandplay solution to power SATA devices from a Molex power source. Key benefits Enables SATA drives to be powered from a standard 4pin Molex (IDE) power connector. Flexible output options: can supply power to 1, 2, or 3 SATA (15pin) HDD/SSD devices from a single Molex source. Compact 10 cm length keeps wiring neat and reachable in tight PC builds. Easy, nofuss upgrade for systems without sufficient SATA power cables. Key attributes Quantity: 1 piece Type: Molex (4pin) to SATA power adapter Outputs: 1, 2, or 3 SATA power connectors (15pin HDD power) Length: 10 cm Interface: Standard Molex 4pin (LP4) power input to standard SATA power outputs Compatibility Works with standard Molex (4pin) peripheral power connectors from most desktop power supplies. Compatible with standard SATA HDDs and SSDs that require SATA power (15pin). What's included 1 x Molex to SATA power adapter cable (capable of supplying 1, 2, or 3 SATA power outputs) Use cases Replacing missing SATA power cables on a desktop PC by using an available Molex connector from the power supply. Powering multiple SATA drives (HDDs or SSDs) from a single Molex source in compact or budget builds. Upgrading an older PC without sufficient SATA power cables to support additional drives, without replacing the power supply. How it helps Provides a straightforward, costeffective way to connect SATA drives when only Molex outlets are available. Supports expanding storage without needing additional power adapters or adapters with bulky connectors. Notes Ensure your power supply can safely handle the current draw of all connected drives. This adapter converts power delivery, not data signals, and is intended for SATA HDD/SSD devices.