Blue Sandblaster for Air Compressors Compact, lightweight sandblaster designed for efficient surface cleaning, paint removal, and glass etching. Works with common blasting media for a range of small to medium restoration and maintenance tasks. Key benefits Efficient operation: Works across an operating pressure range of 70 to 150 PSI (average operating pressure 90 PSI) to deliver even, productive blasting. Broad media compatibility: Accepts steel grit, glass bead, silicon carbide, alumina and similar abrasives, with abrasive size 46 to 100 grit. Simple setup and use: Compatible with most air compressors and standard compressor fittings. Connect the 1/4in air inlet, start the air pump, and squeeze the trigger to operate. Portable and easy to store: 600cc (18 oz) capacity in a compact, lightweight body makes the tool easy to carry and stow between jobs. Precise control: Noload speed 6000 RPM and a spray hole diameter of approx. 5 mm allow controlled, consistent blasting for detailed work. How this product solves common problems Removes paint, rust, scale, and moss without heavy chemical stripping, saving time and reducing surface damage. Provides even media flow at recommended pressures to avoid blotchy or uneven finishes on glass, tile, and metal. Lets you choose the appropriate abrasive for the job, from delicate glass bead for etching to harder media for heavy scale removal. Practical use scenarios Glass etching and decorative detail work on windows and small glass panels using glass bead media at lower pressure settings. Paint and rust removal from metal fittings, fixtures, and small parts prior to repainting. Cleaning scale, moss, and mineral deposits from hot tub surfaces, tiles, and grout lines during maintenance. Specifications Item type: Sandblaster Color: Blue Operating pressure range: 70150 PSI Operating average pressure: 90 PSI Capacity: 600 cc (18 oz) Air consumption: 7.0 scfm (198 l/min) Noload speed: 6000 RPM Air intake: 20 mesh filter Air inlet thread: 1/4in Abrasive size: 46100 grit Nozzle size: 215/16 in length, 7/32 in diameter Spray hole diameter: approx. 5 mm (0.2 in) Package contents 1 x Sandblaster 1 x User manual Important notes The sandblaster does not include a pneumatic nozzle; the nozzle separately. Air inlet thread is 1/4in. Do not aim the nozzle at any part of people or animals to avoid injury. Follow compressor manufacturer recommendations for pressure and airflow to ensure safe and proper operation.