COMPATIBLE FOR USE WITH THE FOLLOWING MODELS LISTED BELOW: YEAR 2006 to 2011 Suitable for use with Aurion 10/2006 to 10/2011 Suitable for use with Kluger 08/2007 to 2013 Do it yourself programming listed below 1 x Complete aftermarket Remote Fob ready for programming New Battery included Item is aftermarket (no logos) Programming instruction for models listed Key Removed from Ignition, drivers door open, all other doors closed Insert key into ignition then remove it - do this twice Close and open the drivers door twice Insert key into the ignition then remove Close and open the drivers door twice Insert the key into the ignition, then close the door Turn the key from off to on - once to add a remote while retaining the original codes, or twice to rewrite the original remote codes Remove key from ignition (locks should cycle) Press the Lock and Unlock buttons on the remote at the same time for 1 second Press and hold any button on the remote for 2 seconds (locks should cycle once for correct programming, or twice if procedure is incomplete) To close programming, open the door of the vehicle.