This DPDT Relay Reed provides double-pole double-throw switching in a single compact unit. It offers two independent circuits that can be controlled together or wired for different applications. Key benefits - DPDT functionality: Two independent switching paths in one relay enable versatile wiring and control of multiple loads or signals from a single device. - Moderate current capability: Handles up to 250 mA, suitable for a range of moderate-current applications such as small indicators, sensors, and low-power control lines. - 5V operation: Coils at 5V for stable actuation, compatible with common 5V logic and control circuits. - Reliable switching: Designed to provide efficient signal transfer and dependable actuation in electrical circuits. - Flexible control and connections: The DPDT configuration allows various wiring options to route signals, select between loads, or perform polarity-related switching as needed. Specifications and compatibility - Configuration: DPDT (double-pole double-throw) - Coil voltage: 5V - Contact current rating: up to 250 mA - Purpose: suitable for moderate-current, low-power switching in 5V control systems Use scenarios - Microcontroller projects: Use the relay to switch between two 5V signals or drive two indicators from a single control line, reducing wiring and component count. - Small motor or actuator control: Wire the DPDT to reverse polarity for a small 5V DC motor, enabling simple forward/reverse control in hobby projects. - Sensor or interlock routing: Route one of two sensor outputs to a microcontroller input, enabling a straightforward selection mechanism without additional logic circuitry.