Remescar Vemedia Droopy Eyelids is an eye cream designed to quickly and easily lift droopy eyelids. Instantly lift upper eyelids Immediate results Clinically proven efficacy It is recommended to use as follows Step 1: Gently wash the face and pat dry gently. Step 2: If using a moisturizer (day cream or eye contour), leave enough time for the moisturizer to be fully absorbed before applying Remescar Droopy Eyelids. Step 3: Apply an amount of product similar to the size of a grain of rice on your finger. If you use less quantity it would not be enough and more quantity could be too much and not be completely absorbed or cause skin sensitivity. Step 4: Rub the cream between your two index fingers until the cream becomes colorless (5 to 10 seconds). Make sure there is still enough cream between your fingers. If your fingers are dry, pick up a small amount of cream again on the fingertips. This is one of the key factors for Remescar Fallen Eyelids to act correctly. Step 5: Gently apply the cream with a finger directly to the crease of the eyelid, starting from the inner corner to the outer corner of the crease of the eye and moving along the crease. If necessary, apply even a little higher, towards the brow bone. Avoid using the cream on the mobile part of the upper eyelid and too close to the eye, since the product would expand when heated with body temperature. Step 6: Keep the eyes closed for 3-4 minutes while the product dries to ensure excellent results (the use of a fan will speed up the process). If you have applied too much cream, remove it with a tissue soaked in a little water. Wash your hands and close the tube after use. To remove the product: clean the area with water and dry. To remove the product: clean the area with water and dry. Before makeup: Apply the usual products (eye contour, moisturizer, etc.) and wait a minute or two for these products to penetrate the layers of the skin. Next, apply a very thin layer of Remescar Fallen Eyelids in the area indicated above. If a white residue remains, it means you have used too much product or have not previously applied a moisturizer. Simply remove the white residue with a little water. When the product is dry, apply makeup as usual.