power ACtoDC PSU / Charger series available in multiple power and voltage configurations. Choose the exact wattage and DC output you need for charging or powering DC equipment with a single, clearly labeled model option (110V_1.5KWCHARGER1F / 110v_1.5kwcharger1f). Key benefits Flexible capacity: available in 1500W, 1400W, 1300W, 1250W, 1200W, 1100W, 1000W and 800W ratings so you can match the unit to your load and avoid oversizing or undersizing. Multiple DC output voltages: choose from 12V, 24V, 30V, 36V, 48V, 60V, 72V, 80V and 90V outputs to suit a wide range of devices and battery systems. Wide AC input compatibility: supports 110–220V AC mains for flexible deployment in different regions and installations. Clear model identification: 110V_1.5KWCHARGER1F (listed also as 110v_1.5kwcharger1f) for the 1.5 kW variant, allowing straightforward ordering and replacement. Primary functionality and compatibility Function: AC mains to DC power supply and charger (PSU/charger) for DCpowered equipment and battery packs. Available as fixedoutput models in the voltages and wattages listed above. Compatibility: intended for devices and battery systems that require one of the specified DC voltages and up to the matching wattage. Select the voltage and wattage variant that matches the device specifications to ensure correct operation. Input: 110–220V AC (singlephase), selectable by model or configured for universal AC input as indicated. Output: fixed DC outputs available at 12V, 24V, 30V, 36V, 48V, 60V, 72V, 80V, 90V. Output current capability corresponds to the selected wattage (Wattage divided by voltage = maximum output current). Key attributes Power range: 800W through 1500W variants (800W, 1000W, 1100W, 1200W, 1250W, 1300W, 1400W, 1500W). Voltage options: 12V, 24V, 30V, 36V, 48V, 60V, 72V, 80V, 90V. Input voltage: 110–220V AC. Model reference: 110V_1.5KWCHARGER1F (also referenced as 110v_1.5kwcharger1f and 220v 110v_1.5kwcharger1f in listings). Use as either a power supply (PSU) to run DC equipment or as a charger for compatible battery packs, when matched to the correct voltage and wattage. Performance and selection guidance Match the DC output voltage exactly to your device or battery pack nominal voltage. Calculate required current by dividing the chosen wattage by the output voltage (I = W / V). Select a wattage variant that supplies at least the steadystate and peak current your application requires. The 1500W (1.5 kW) model is identified as 110V_1.5KWCHARGER1F; other wattage options correspond to the same family of PSU/charger variants. Confirm mains supply is within 110–220V AC before installation. Typical applications (use cases) Charging and maintaining DC battery packs and modules used in electric scooters, ebikes, small electric vehicles and custom battery systems where one of the listed DC voltages and power levels is required. Powering DC equipment in workshops and industrial settings such as DC motors, controllers, test benches, LED power supplies and control electronics that operate at 12V–90V DC. Backup power and laboratory or prototyping setups where a dependable, wattage DC supply is needed to test or run equipment across multiple voltage levels. Installation and selection tips Choose the exact combination of output voltage and wattage you require. Verify the product model code when ordering, for example 110V_1.5KWCHARGER1F for the 1500W unit. Ensure adequate ventilation and follow any sitespecific electrical codes for installation and wiring. Use appropriately rated cables, connectors and fusing sized for the maximum output current of the selected wattage/voltage combination. If using as a battery charger, follow the battery manufacturer's recommended charging procedures and ensure the charger configuration matches battery chemistry and charging profile. Ordering information Available variants by wattage: 1500W, 1400W, 1300W, 1250W, 1200W, 1100W, 1000W, 800W. Available DC output voltages: 12V, 24V, 30V, 36V, 48V, 60V, 72V, 80V, 90V. Input: 110–220V AC. Model code example for 1.5 kW variant: 110V_1.5KWCHARGER1F (also shown as 110v_1.5kwcharger1f). If you need a specific wattage and voltage configuration, select the matching variant by the wattage and output voltage when placing your .