Gsk Polident (OTC) Buffer Effect is a hydro-active denture adhesive, which provides a strong daily hold. Its gel formula expands on contact with saliva, providing comfort and a cushioning effect on the gums. It is advisable to use a small amount of the product for the first time. Apply once a day for a secure grip. If you need to apply the adhesive more than once a day, ask your dentist for advice. Application: Clean and dry the prosthesis. Apply the product not too close to the edge of the prosthesis. Upper prosthesis: apply the product forming a long continuous strip not too close to the edge of the prosthesis and two smaller strips in the center of the prosthesis. Lower prosthesis: apply the product forming a long continuous band. Movable bridges: apply two small strips. Rinse your mouth before inserting the prosthesis. Insert the prosthesis and hold it in place and briefly clench your teeth to ensure a seal. Removal: Rinse mouth with water. Slowly remove the prosthesis with a bascue motion. Remove any adhesive residue from the denture and mouth with lukewarm water and a soft bristle brush. Polident cleaners can be used to thoroughly clean the prosthesis and then rinse with water. Keep out of the reach of children. Some people may be sensitive or allergic to this product. If you experience any allergic reaction or discomfort, discontinue use immediately. Ingestion of small amounts of the product, even when used as directed, may occur and is not harmful. Visit the dentist regularly to check the correct fit of the prosthesis. To make sure the dispenser does not clog, keep the cap and spout dry. The ends of the case are glued. Store the product at a temperature not exceeding 30 ° C. Validity for intact packaging: 24 months.