Overview This outdoor network connector provides a simple plugandplay way to link 100M PoE equipment without configuration. The waterproof main body is built for outdoor use, and the device supports direct connections to switches while reducing cabling needs. Key benefits Ready to use: Plugandplay installation requires no configuration or setup. Outdoor ready: Main body uses a waterproof design suitable for outdoor deployments. Works with 100M PoE equipment: Directly compatible with 100 Mbps PoE devices and network switches. Dualdevice support: Allows two devices to be connected to the Internet at the same time through a single connection point. Cabling and cost savings: Converts 8core wiring to 4core use, reducing cable runs and installation cost. Direct switch connection: Devices can be linked straight to a network switch for reliable network access. Function and performance Function: Provides a direct connection interface for PoEenabled network devices, enabling simultaneous connectivity for two endpoints. Performance: Supports 100 Mbps PoE data rates and stable Ethernet link when used with compatible PoE equipment. Operation: Simple physical connection, no software configuration or network changes required. Compatibility Designed for use with 100M PoE equipment and standard Ethernet switches. Compatible with common PoE devices such as IP cameras and wireless access points when those devices operate at 100 Mbps. Practical applications Outdoor surveillance: Connect two outdoor IP cameras to a switch through a single protected connection point, reducing cable runs and simplifying installation. Wireless access point deployments: Provide PoE and network connectivity to outdoor access points in parks, courtyards, and building exteriors without extra setup. Small network extensions: Link two network endpoints from a single cable route to reduce trenching or conduit requirements in field installations. What to expect Fast, straightforward installation with no network configuration. A waterproof enclosure suitable for exposed locations. Reduced cabling complexity by using 4core wiring where appropriate, while maintaining 100 Mbps PoE compatibility. Note: Use with compatible 100M PoE equipment and standard Ethernet infrastructure for results.