Feature:1. Fit for Evinrude ETEC, a binaural remote control component designed for Evinrude / Johnson outboard.2. The fast idle button can be used to advance the throttle without shifting gears. With the control lever in neutral, press the fast idle button (cover) to open the throttle for starting and warming up.3. Move the control handle to the forward or reverse position when in neutral and fast idle function is not activated. Continue to move the control handle in the same direction to open (advance) the throttle.4. Adjust the friction adjustment screw of the control handle with a flatblade screwdriver. This adjustment is used to increase or decrease the force required to move the control handle.5. When certain engine failures occur, the warning horn will sound to warn the operator. When the key switch is turned on, a self-check buzzer should sound for 1/2 second.Specification:Item Type: Outboard Remote Control.Material: ABSOEM: 5006182Manufacturer Part Number: IREWL0011241570586160Fitment: Fit for Evinrude Engine 1996NewInstallation: Side MountModel:Single Lever BinnacleHow to Use: Install the control box in the original position of the control box and fix it, then connect the wireWiring Instructions: Buckle design, plug and playPackage List:1 x Outboard Remote Control Box1 x Buzzer1 x Strap5 x Sponge Pad8 x Long Bolt6 x Gasket4 x Nut2 x Pin1 x ManualNote:Please double check the part number of your item, matching information is for reference only. If you are unsure of the item, please contact us before buying to avoid unnecessary return, thanks!