MT50 meter module designed for compact panel mounting and efficient operation Key benefits Low power draw for energyefficient installations: selfconsumption listed as less than 65 mA, less than 23 mA, and less than 15 mA depending on operating condition. Compact, easytofit design: standard faceplate and frame sizes suit common electrical enclosures. Simple network connection: RJ45 connector for consistent data or communication cabling. Ready for a wide range of environments: rated for operation from 20 C to +70 C (4 F to 158 F). Lightweight and unobtrusive: net weight 0.190 Kg helps minimize load on panels and enclosures. Technical specifications Model: MT50 Selfconsumption (various modes): less than 65 mA, less than 23 mA, less than 15 mA Faceplate dimensions: 98 x 98 mm / 3.86 x 3.86 in Frame dimensions: 114 x 114 mm / 4.49 x 4.49 in Connector type: RJ45 Meter cable: standard 2 m; specification also notes max .50 m Net weight: 0.190 Kg Ambient operating temperature: 20 C to +70 C (4 F to 158 F) Practical applications Control panel integration: fits standard panel cutouts for status displays or monitoring readouts where low power draw is important. Equipment monitoring: use RJ45 connectivity to link the MT50 to data acquisition systems in industrial and commercial installations. Building automation and energy management: compact size and wide temperature tolerance make the MT50 suitable for distributed meter or interface points inside enclosures. What makes it stand out Combination of multiple low selfconsumption ratings and a very compact faceplate provides flexibility for installations sensitive to power budget and space. Standard RJ45 connectivity simplifies wiring and integration into existing networked systems. Clear, consistent mechanical dimensions and low weight support straightforward replacement or retrofit into existing panels. Packaging and handling notes Confirm meter cable length requirements at installation, noting the standard 2 m cable and the alternate max .50 m listing in the specification. Ensure panel cutout and frame clearance match the listed faceplate and frame dimensions before final installation.