MPPT wind charge controller designed to maximize energy harvest, protect batteries, and simplify system setup for 12V and 24V systems. Key benefits Higher energy yield: Maximum Power Point Tracking optimizes turbine output so more usable power reaches the battery compared to basic controllers. Automatic voltage matching: Automatically detects and configures for 12V or 24V battery banks, removing manual setup errors. Faster heat dissipation: Thermal design reduces temperature build up for more stable performance under continuous load. Clear status feedback: Digital LED indicators provide immediate information on charging status, system voltage, and fault conditions. Reliable battery charging: Built to manage the full charging process, helping extend battery service life by following appropriate charge profiles. What this controller does Tracks turbine power in real time to extract the available energy and convert it efficiently to battery charging current. Monitors system voltage and charging state, applying regulated charge to the battery until full and preventing overcharging. Provides simple visual status via LEDs so you can confirm system operation at a glance. Compatibility and function Compatible with both 12V and 24V battery systems; suitable for small wind turbine installations that require MPPT control and regulated charging. Works with common lead acid and deep cycle battery banks used in offgrid power systems. Performance and build efficiency MPPT conversion improves usable output from wind sources, especially useful under variable wind conditions. Thermal management for fast heat dissipation supports stable operation during extended charging periods. Clear digital LED indicator allows for quick diagnostics without additional meters or tools. Typical applications Offgrid cabins and remote homes: Keep deep cycle battery banks charged from small wind turbines when solar is limited. Marine and RV systems: Integrate into wind turbine setups to maintain battery state of charge while underway or at anchor. Remote monitoring and telecom sites: Provide reliable charging for backup batteries in locations with inconsistent grid access. Why you might choose this controller If you want a straightforward MPPT solution that increases energy capture from a wind turbine and automatically adapts to 12V or 24V battery banks, this controller delivers clear status feedback and thermal performance needed for reliable battery charging. Note Intended for use with wind turbine systems and battery banks configured at 12V or 24V. Follow manufacturer installation instructions and wiring guidelines for safe and effective operation.