Product overview This MPPT wind and solar hybrid controller manages combined wind turbine and solar panel charging for battery systems. It supports multiple voltage options and a wide range of turbine and panel powers, includes configurable load outputs, and provides a clear LCD display with adjustable parameters. Key benefits Maximizes energy harvest from wind and solar sources using MPPT wind boost and PWM solar charging. Simplifies hybrid system control with automatic voltage selection and dual power supply options from battery and solar. Reduces manual setup time with an LCD color display, configurable modes, and mobile APP parameter viewing and setting. Protects system components with multiple builtin protections and an external dump resistor for excess wind power. Important recommendation For systems with wind turbine 800W and solar 600W or higher, select 24V or 48V voltage configuration. Main features MPPT wind boost regulation for higher wind power extraction. PWM solar charging using MOSFET series control and solar intelligent separation charging. PWM dump load control for continuous wind energy dissipation with external discharge resistor included. Dual power supply for controller operation: battery and solar panel. Two load outputs with configurable power and time schedules; operating parameters can be viewed and adjusted via mobile APP. Multiple working modes: pure light control, normal open, light control and time control mode with four periods and morning light option. Compatible with horizontal and vertical turbines, AC and DC wind turbines. LCD color display showing voltage, battery level, current, power, charging mode, temperature, and other configurable parameters. Controller dimensions 162 x 140 x 64 mm; housing made of aluminum alloy. Internal PCB treated with threelayer protective coating for dust, moisture, and antistatic resistance. performance, stable microcontroller based control and adjustable load output modes. Technical specifications Project type: MPPT Wind Solar Hybrid Controller Material: Aluminum alloy Rated voltage options: 12V, 24V, 48V (autodetection available for 12V and 24V) Controller power range: wind 300 to 1500W, solar panel 500 to 1200W (select model accordingly) Control modes: MPPT wind boost charging, PWM discharge, PWM overcurrent limiting Display: LCD color with humanized key operation Controller size: 162 x 140 x 64 mm Applicable turbine types: horizontal wind turbine, vertical wind turbine, AC wind turbine, DC wind turbine Builtin protections and functions Solar reverse connection protection Battery reverse connection protection Overload and undervoltage monitoring Overcurrent and open circuit protections Lightning protection External dump load support for excess wind energy What is included 1 x Wind Solar Hybrid Controller 1 x External Discharge Resistor How to use Scan the QR code in the package to access the instruction manual and follow the setup steps. Configure voltage, working mode, and load schedules through the controller interface or mobile APP according to system design. For turbines or panels near the upper power limits, set the controller voltage to 24V or 48V as recommended. Typical applications Offgrid homes and cabins combining small wind turbines and solar panels for battery charging. Marine and shipboard installations where wind and solar generation are used together to maintain battery banks. Street lighting or remote lighting systems using hybrid wind and solar power with scheduled load control. Compatibility notes Recommended for systems matching the controller power ranges listed in specifications. For combined wind power of 800W or solar power of 600W and above, choose a 24V or 48V controller configuration. This controller is intended for managing hybrid wind and solar charging systems and for configuring and protecting battery charging and load outputs. Follow the included manual for correct installation, wiring, and parameter settings.