Size 12V; Color 8000w Product summary Industrialgrade MPPT hybrid charge controller for wind and solar hybrid systems. Designed for small offgrid devices such as hybrid street lights, remote lighting, and auxiliary power systems. Provides MPPT solar tracking and MPPT boost charging for wind generators to improve overall charging efficiency and battery life. Key benefits Higher charging efficiency through MPPT control for both solar panels and wind generators. Safer, more reliable charging for 12V, 24V, or 48V battery systems, including lithium batteries. Two powerrange versions to match system scale: one version supports maximum combined power of 6000W to 8000W, the other supports maximum combined power of 10000W to 140000W. according to your system requirements. Low standby current to minimize drain on batteries when loads are inactive. Main features and specifications MPPT boost charging function for wind generators and MPPT solar tracking. System rated voltages supported: 12V, 24V, 48V. Compatibility note: system must meet these limits The value obtained by (wind power rating plus photovoltaic rating) divided by system voltage must be less than or equal to 40A. Wind power rating divided by system voltage must be less than or equal to 25A. Photovoltaic rating divided by system voltage must be less than or equal to 25A. Noload DC current: 0.05A or less. Controller can be powered by the battery or by the photovoltaic panel. Product dimensions: 167 x 145.5 x 61.8 mm (6.57 x 5.73 x 2.43 in). Package size: 360 x 250 x 120 mm. Working temperature range: 20 to +55 degrees Celsius. Operating humidity: 35 to 85 percent relative humidity, no condensation. Included in the package 1 wind and solar hybrid controller Recommended applications and scenarios Small offgrid street lighting where a wind generator supplements solar panels to maintain reliable nocturnal lighting. Remote cabins or shelters where combined wind and solar charging keeps 12V, 24V, or 48V batteries charged for lights, communications, or small appliances. Remote monitoring stations, signage, or sensor networks that require continuous lowcurrent supply and efficient renewable charging. Installation and selection guidance Choose the controller version based on the maximum combined power of your wind generator and solar array: 6000W to 8000W model or 10000W to 140000W model. Verify that the combined ratings and individual source ratings divided by your chosen system voltage meet the current limits listed above. Ensure proper ventilation and avoid condensation to maintain stable operation within the specified temperature and humidity ranges. Support Customer satisfaction is a priority. If you have questions about compatibility, installation, or operation, consult the seller or product documentation for assistance.