RADAR MOTION SENSOR LED BULB Key benefits and why you need it Hands lighting in lowlight conditions: automatically turns on when motion is detected and the ambient brightness is below 6LUX. Energy efficient and low maintenance: 7W LED with standby mode that does not consume electricity when not in use. Wide sensing coverage: detects motion up to 57 meters away, at heights of 35 meters, with a broad 140° detection angle. Simple operation with consistent performance: designed to turn off after a short delay, maintaining convenience without waste. Product specifications Wattage: 7W Input voltage: AC 90265V Detection Area: 57m Detection height: 35m Detection Angle: 140° Delay time: 30±3 seconds Functionality and usage notes The bulbs cannot be used in daylight or in bright areas. Please keep the power on and turn on at all times. In standby state, the motion sensor bulbs do not consume electricity. Do not use this motion bulb with switches that have touch sensor, infrared sensor, voice control, or light control functions. When turning on the switch in daytime, the bulb will be turned on. This is normal; after about 17±3 seconds, the bulb will operate normally. Please remember to leave the switch on. Practical use scenarios Hallways and corridors: automatic illumination as you walk from room to room, improving safety and convenience without fumbling for switches. Entryways and stairwells: instant light when you approach, then automatically shuts off after the delay to save energy. Garages and storage rooms: motionactivated lighting that activates only when needed, reducing unnecessary power use.