F150 Matte charcoal Monitor Stand with Gas Spring Wall Mount Bracket Key benefits Smooth, adjustable positioning: Gas spring mechanism allows effortless height and angle changes for quick, precise screen placement. Space saving and tidy installation: Wallmounted design frees desk area and keeps cables and workspace neater. Reliable range and control: Wide tilt, rotation, and vertical travel let you position the screen for viewing, collaboration, or presentations without tools. What it does Supports single screens sized 17 inches to 35 inches. Confirm that your screen mounting holes fall within the supported VESA patterns before . Provides controlled vertical movement up to 195 mm to fine tune screen height. Extends from a minimum of 100 mm to a maximum of 445 mm from the wall to suit different room layouts. Compatibility and load limits Maximum load range 3 kg to 12 kg (6.6 lbs to 26.4 lbs). Make sure your screen weight is within this range for proper gas spring operation. Fits VESA 75 x 75 mm and 100 x 100 mm mounting hole patterns. For 200 x 100, 100 x 200, or 200 x 200 mm patterns, use a compatible adapter plate. Adjustment and movement Tilt range from minus 30 degrees to 85 degrees for downward or upward screen angle. Horizontal rotation 180 degrees left and right for easy sharing of the screen or switching viewing orientation. Vertical travel 0 to 195 mm for precise height adjustment. Appearance and finish Model: F150 Matte charcoal Matte charcoal finish for a lowreflective, professional look that integrates with most interiors. Practical applications Home office: Mount a 24 inch to 27 inch monitor to clear desk space and position the screen at eye level for daytime work. Small meeting rooms or huddle spaces: Install a 17 inch to 35 inch display on the wall for shared viewing and easy angle adjustment during presentations. Retail or pointof counter: Use the mount to position a compact customer display or terminal screen where it is easily visible and adjustable. Notes for installation Verify that your screen weight and VESA hole pattern match the specifications listed above. If the weight is outside 3 kg to 12 kg, the gas spring will not perform as intended. If your device uses VESA patterns larger than 100 x 100 mm, select an adapter plate that matches 200 x 100, 100 x 200, or 200 x 200 mm. This monitor stand combines flexible, tool adjustment with a discrete matte charcoal finish and clear compatibility information to help you mount and position compatible 17 inch to 35 inch screens with confidence.