Compact micro hydro generator available in two configurations: threephase AC output and fivewire with temperature detection. Converts household water flow into lowpower AC output for energy harvesting and flow sensing. Water lily turbine design improves conversion efficiency and is compatible with standard G1/2 plumbing. Key benefits Harvests clean energy from running water for lowpower applications and charging circuits. Integrated flow sensing and optional temperature detection for system monitoring and control. Low standby power consumption, less than or equal to 1 W. Standard 4point G1/2 interface for easy installation on showers and sinks. Operates across common residential pressures and flow rates for wide compatibility. Common applications Outdoor shower or campsite charging: power small USB charging circuits or LED lighting when combined with appropriate rectification and regulation. Plumbing flow and temperature monitoring: use the fivewire model to add water temperature detection to building or RV systems. Energy harvesting on boats, RVs, or remote sinks where lowpower AC generation can supplement sensors and control electronics. Specifications (shared) Storage temperature: 25 to 65 C Maximum allowable ambient temperature: 100 C for up to 30 minutes Interface size: 4 points (G1/2) Maximum working pressure: 1.2 MPa Working pressure: 0 to 1.0 MPa Test pressure: 0.6 MPa Temperature range: 0 to 80 C Flow range: 3.5 to 20 L/min (recommended pressure 0.05 to 0.2 MPa) Threephase AC output model Model type: threephase AC output Working power: less than or equal to 1 W Flow behavior and outputs: Maximum output: 20 plus/minus 0.3 VAC at 10 L/min Output voltage: 10 plus/minus 0.3 VAC at 4 L/min Starting output: approximately 2.5 plus/minus 0.25 VAC at 3.5 L/min Fivewire with temperature detection model Model type: fivewire with temperature detection Working power: less than or equal to 1 W Flow behavior and outputs: Maximum output: 12 plus/minus 0.3 VAC at 10 L/min Output voltage range: approximately 5 to 12 plus/minus 0.3 VAC at 4 L/min Starting output: approximately 3 plus/minus 0.25 VAC at 3.5 L/min Installation and compatibility notes Designed to fit standard G1/2 plumbing connections on showers and sinks. conversion occurs within 0.05 to 0.2 MPa pressure and 3.5 to 20 L/min flow. Output is lowvoltage AC suitable for rectification and regulation into DC for charging or powering lowpower electronics. Use appropriate power electronics and protection when integrating with batteries or devices. The fivewire model adds a temperature detection line for combined flow and temperature monitoring. What makes this product stand out Dual options for simple AC generation or AC generation plus temperature sensing in one compact unit. Low power draw and compact plumbingcompatible design make it practical for retrofit use in showers, sinks, RVs, and boats. Clear performance data for multiple flow conditions to aid system design and integration.