Professional tap and die set for commercial or occasional use Metric tap and die set Manufactured from tungsten alloy steel for strength and durability Dies are split dies which helps to facilitate the fine adjustment of core diameter Set includes both metric and coarse fine sizes Taper taps Taper thread distributes the cutting force over a larger area and the taper shape helps the thread to start Suitable to be used to start a thread In the dies there are 2 holes this allows the die holder to attach the die and stop it from slipping when using Right handed threaded die Suitable for most materials such as steel, aluminium, copper etc... Right hand threaded taps SET INCLUDES THE FOLLOWING • Dies - (38mm in diameter) - M6 x 0.75 / M6 x 1.0 / M8 x 1.0 / M8 x 1.25 / M10 x 1.25 / M10 x 1.5 / M12 x 1.5 / M12 x 1.75 / M14 x 1.5 / M14 x 2.0 / M16 x 1.5 / M16 x 2.0 / M18 x 1.5 and M18 x 2.5 • Dies - (50mm in diameter) - M20 x 1.5 / M20 x 2.5 / M22 x 1.5 / M22 x 2.5 / M24 x 1.5 and M24 x 3.0 • Taps - M6 x 0.75 / M6 x 1.0 / M8 x 1.0 / M8 x 1.25 / M10 x 1.25 / M10 x 1.5 / M12 x 1.5 / M12 x 1.75 / M14 x 1.5 / M14 x 2.0 / M16 x 1.5 / M16 x 2.0 / M18 x 1.5 / M18 x 2.5 / M20 x 1.5 / M20 x 2.5 / M22 x 1.5 / M22 x 2.5 / M24 x 1.5 and M24 x 3.0 • 1 x Long handle adjustable tap wrench • 1 x T handle tap wrench • 1 x large die holder (comes complete with adaptor as well so can be used as a 38mm or 50mm die holder) • 1 x screwdriver to fasten the dies properly in the die holder Comes in a metal tin for easy storage and transportation