Hshaped Solar Y Branch Connector Pair (1 to 2 Connectors, M/FF and F/MM) Overview A pair of Hshaped 2to1 solar panel cable connectors designed for parallel connections. Available as 1 male to 2 female (M/FF) and 1 female to 2 male (F/MM). Plugandplay design for quick, reliable wiring of solar arrays. Key benefits Simple parallel wiring: Combine two solar panel outputs into a single line without cutting or splicing cables. Weatherproof and durable: IP67 protection and robust materials provide reliable outdoor performance. electrical capacity: Rated for 1000 V DC and 30 A to match common solar system requirements. Low electrical loss: Silverplated copper contacts ensure good conductivity and a low contact resistance (<= 5 mOhm). Wide operating temperature: Works from 40F to +185F (40C to +85C) for varied climates. Secure locking: Builtin lock on the male connector keeps connections stable; press both sides of the lock to engage or release. Technical highlights Rated voltage: 1000 V DC Rated current: 30 A Waterproof degree: IP67 Connector housing: insulating PPO Contact material: silverplated copper Operating temperature: 40F to +185F (40C to +85C) Suitable cable: 14 to 10 AWG (2.5 to 6 mm2) Flammability rating: UL94V0 Safety class: II Contact resistance: <= 5 mOhm Insertion force: <= 50 N Withdrawal force: >= 50 N Package contents 1 pair (2 pieces) Hshaped 2to1 solar panel cable connectors (MFF and FMM) Typical applications Residential rooftop arrays: Parallel two panels to increase current into a charge controller or inverter input. Offgrid systems for RVs, boats, and cabins: Simplify wiring when adding panels to an existing array. Temporary or portable solar setups: Quick assembly and secure, weatherproof connections for field use. Installation tips Use compatible 14 to 10 AWG cables and ensure correct polarity when connecting. Press both sides of the male connector lock to insert or remove the mating connector. Verify tight connections and check for proper sealing before longterm outdoor exposure. This connector pair provides a straightforward, weatherresistant method to parallel solar panels while maintaining electrical performance and secure locking.