Mainboard for nintendo switch dock oem docking station pcb hdmi, usb 2.0 port, usb c power port
Features:- Replacement OEM mainboard for Nintendo Switch dock. - Features 1 x HDMI, 1 x USB 3.0 & 2 x USB 3.0 ports.- Used within the dock to connect your console to your TV & charge it. - Requires technical internal fitting - Tri-wing screwdriver required (not included).- Secondary USB C charging board PCB for console docking is not included.Description:A replacement mainboard PCB (motherboard) for the Nintendo Switch Docking station.This PCB connects the console to a TV, charges the console and allows other accessories to connect with the console such as a wired controller. The mainboard is held inside the outer plastics of the dock by a couple of plastic clips and is easy to remove and replace. To acess the insides of the dock you will need a tri-wing security screwdriver to remove the docks casing screws, a pair or tweezers to spudger is also recommended to help release the ribbon cable and connector on the oposite side. A replacement board may be needed to repair one with damaged USB ports or faulty HDMI issues. There may be a number of possible causes for dock issues and therefore technical assistance should be obtained from Nintendo or a qualified technician before concluding that the mainboard does need replacing.Another use for this mainboard is in the building of a second docking station using DIY smaller docking station housings (available seperately), this is ideal for creating a portable dock for travelling. Mainboard PCB only, no other dock parts are included, a tri-wing screwdriver is required to install this part (not included).