LX LP300 Pump 3HP - 220V/50Hz - 10.0 Amps

$269.00
+ $70.99 Shipping

LX LP300 Pump 3HP - 220V/50Hz - 10.0 Amps

  • Brand: LX

LX LP300 Pump 3HP - 220V/50Hz - 10.0 Amps

  • Brand: LX
RRP: $574.00
Price: $269.00
You save: $305.00 (53%)
Sold by:
$269.00
+ $70.99 Shipping

Taxes calculated at checkout

In stock

We accept the following payment methods

Description

LX LP300 Pump 3 HP | Hot Tub | Spa | Whirlpool Bath | Water Circulation Pump | 220V/50Hz | 10.0 Amps. LX LP300 Pump Technical Information Brand: LX Product: LP300 Pump HP: 3 Maximum Water Flow: 635 Liters per Minute Intended for: Hot Tub, Whirlpool Bath, and Spa Pools Certification: TUV Certified and CE Certified LX LP300 pump is a single-phase, centrifugal water pump. It has a two-inch diameter wet end suction (located at the middle of the unit) and backflow (located at the right of the unit). It is equipped with a thermal detector mechanism to prevent overheating, making it a good replacement part for hot tubs and spa systems, except those with SpaQuip and SpaNet controllers. A pump can have a machine running up to five horsepower. The voltage capacity can be 220-240 volts or 110-120 volts. The LX LP300 pump is a three horsepower. We carry wide selection of genuine LX water pumps.To be certain which is the right water pump for your hydrotherapy solution, please check the label found on your old machine, or contact us for inquiries. LX LP300 Centrifugal Water Pump: How it Works Water circulation pumps power the body jets of a tub, whirlpool bath, and other spa systems. The most common type of pump used in these is coined as centrifugal. A centrifugal pump, also known as a radial-flow pump, is a high-pressure pump built with a backward-swept rotor rotating anticlockwise. The pump speeds up water flow as it goes through the center. Water vents out of the pump in a radial manner, hence the name. A pump containing one rotor is considered as a single-phase or single-speed pump. An example of a single-phased centrifugal water pump is the LX LP300 pump. Priming and Self-Priming Pumps Air is lighter than water, hence in a manual priming pump, it will stay afloat on top of the casing. This will prevent the rotor from operating and may lead to overheating. Air and water can circulate in a self-priming, centrifugal pump. The machine itself combines both elements into a single fluid and then vents the air out. Water without air is denser than air and water combined. This allows water to move through the rotor energizing hot tub and whirlpool bath jets. Want to know more about water pumps? - Please head on to our Whirlpool Bath Buyers Guide.
  • Fruugo ID: 15818098-33931636
  • EAN: 5060387445677

Product Safety Information

Please see the product safety information specific to this product outlined below

The following information is provided by the independent third-party retailer selling this product.

Product Safety Labels

CE Mark
Safety Warnings: This pump is for use with permanently installed pools only. Do not use with storable pools. MOTOR MUST BE GROUNDED IN ACCORDANCE WITH LOCAL AND NATIONAL ELECTRIC CODES. COMPONENT COVER MUST BE IN PLACE BEFORE OPERATION TO PREVENT ELECTRICAL SHOCK OR INJURY. DO NOT RUN PUMP DRY.

Delivery & Returns

Dispatched within 24 hours

  • STANDARD: $70.99 - Delivery between Tue 29 July 2025–Mon 18 August 2025 - Cheapest

  • EXPRESS: $113.99 - Delivery by Mon 28 July 2025 - Fastest

Shipping from United Kingdom.

We do our best to ensure that the products that you order are delivered to you in full and according to your specifications. However, should you receive an incomplete order, or items different from the ones you ordered, or there is some other reason why you are not satisfied with the order, you may return the order, or any products included in the order, and receive a full refund for the items. View full return policy

Product Compliance Details

Please see the compliance information specific to this product outlined below.

The following information is provided by the independent third-party retailer selling this product.

Manufacturer
The following information outlines the contact details for the manufacturer of the relevant product sold on Fruugo.

  • LX Pumps
  • LX Pumps
  • Colwall Lodge
  • Solihull
  • GB
  • B91 2PQ
  • waterpumpcn@aliyun.com
  • 0086-18925048292
  • http://www.lxpumpcn.com/

Responsible Person in the EU
The following information outlines the contact information for the responsible person in the EU. The responsible person is the designated economic operator based in the EU who is responsible for the compliance obligations relating to the relevant product sold into the European Union.

  • Webinterpret
  • Webinterpret
  • 128 Rue La Boetie
  • Paris
  • FR
  • 75008
  • waterpumpcn@aliyun.com