Key benefits Precise, consistent thinning for leather projects: adjustable cutting width and dualside controls let you produce flat, leveled edges every time. Built to last: stainless steel handle and lightweight aluminum body resist wear and provide stable, reliable performance. Works where it matters: designed for harder leathers (for example vegetabletanned) and long pieces such as belts and straps. What it does Manual leather thinning tool for use on leather thicker than 0.85 mm. Adjustable thinning width from 0 to 45 mm so you can set the exact amount of material to remove. Dual adjustment screws provide fine control for even, repeatable skiving and edge thinning. Material and compatibility Handle: durable stainless steel for long service life and comfortable manual control. Body: lightweight aluminum for stiffness without excess weight. suited for hard, firm leathers (vegetabletanned and similar). Avoid overly soft materials that may not thin evenly. Performance and safety Produces flat, leveled edges ideal for clean seams, buckles and strap fittings. Manual operation gives you tactile feedback and precise control. For safe, results, securely fasten the leather thinning unit before use to prevent cracking or uneven skives. Typical applications Trimming and tapering belts or long straps to fit buckles and keep edges smooth. Thinning leather edges for quilting and sewing to reduce bulk at seams. Preparing leather panels and strap ends for neat assembly on bags, saddlery and leatherwork projects. Quick user tips Set the thinning width (0–45 mm) with the side adjustment screws to match the job. Fasten the tool securely before running long pieces to avoid cracking and to maintain even skives. Use on leather thicker than 0.85 mm and avoid very soft materials for results.