Product benefits - Secure, low-profile way to attach a mosquito net to a window frame without screws or permanent changes. - Invisible self-adhesive hook surface keeps the net neat and out of sight while providing reliable hold once the adhesive sets. - Easy to remove and reattach the net repeatedly without tools when handled correctly. Key attributes - Function: self-adhesive invisible hook-and-loop tape for mounting mosquito nets to window frames. - Compatibility: designed for use with standard window frames and mesh mosquito nets that attach to a hook surface. - Material and finish: self-adhesive backing on one side and an invisible hook surface on the other for a low-profile appearance. - Performance: strong adhesion after full curing; hook surface provides repeated attach/detach functionality when cared for properly. Installation and care (short, practical steps) 1. Clean the window frame thoroughly to remove dust, oil, or residue. A clean surface ensures best adhesion. 2. Apply the self-adhesive tape: press the sticker side firmly onto the frame so the invisible hook surface faces outward. 3. Wait 24 hours before mounting the mosquito net. Do not change or stress the window or tape during this curing period — the adhesive needs time to reach full strength. 4. Press the mosquito net onto the hook surface to secure it in place. 5. When opening or removing the net, hold the Velcro area with one hand and peel gently to avoid undue stress on the adhesive and prolong the system’s life. Practical use scenarios - Rental apartments where drilling into the frame is not allowed: install a secure mosquito barrier without damaging the frame. - Seasonal mosquito protection: attach and remove nets each season without tools, then store the net and reuse the same adhesive tape for the next season (follow care instructions). - Children’s rooms or bedrooms: keep insects out while maintaining a tidy, discreet finish that does not obstruct light or view. Important warnings and tips - Do not detach or stress the tape immediately after sticking; allow 24 hours for the adhesive to fully bond. - To maximize durability, always support the Velcro with a hand when opening the net rather than pulling the net itself. - Ensure the mounting surface is smooth and clean for best results. What you get - An invisible self-adhesive hook surface that makes mounting mosquito nets simple, discreet, and effective when installed and maintained according to the instructions.