Gravel Grid Ground Stabilization Panel — 2X4m (6.6X13.1ft) Overview A heavyduty ground grid designed to stabilize loose fill, improve load distribution, and prevent rutting and erosion. Ideal for slopes and flat areas where a durable, easy to install solution is needed for driveways, parking areas, walkways, patios, and landscaping projects. Key Benefits Increases loadbearing capacity and reduces surface movement when cells are filled with gravel, soil, sand, or concrete. Holds fill material in place to prevent erosion and rutting while preserving the natural terrain. Lightweight and foldable for easy transport and storage; panels can be trimmed to fit irregular shapes and project sizes. Durable construction provides longterm dimensional stability under heavy traffic and harsh ground conditions. Main Features Material: Ecofriendly polyethylene HDPE for abrasion resistance and chemical stability in common soil conditions. Cell size: Fully expanded single cell area 40 cm x 40 cm (15.7 inch x 15.7 inch). Height: 5 cm (2 inch). Loadbearing capacity: 1800 lbs per square inch (approximately 816 kg per square inch) when cells are filled. Can be cut to size to match site requirements; pieces connect together with buckles and can be anchored to the ground. Applications and Use Cases Residential driveway reinforcement: Lay the panels on a prepared base, anchor, connect multiple panels, then fill with gravel to create a stable, lowmaintenance driveway surface. Parking areas and access lanes: Spread over compacted ground and fill with aggregate to support vehicle loads and reduce rutting. Slope stabilization and erosion control: Install on embankments or slope faces, fill with soil or gravel to reduce soil displacement and protect against washout. Additional uses include patios, garden paths, playground base, shed foundations, and trails. Installation Overview Unfold and expand the grid panels on a prepared, compacted base. Trim panels as needed to fit the area. Anchor panels to the ground and join adjacent panels using the provided buckles or connectors. Fill each cell with chosen material such as gravel, crushed stone, soil, or concrete until level with the of the cells. Compact the fill as required to achieve the desired surface finish. Package Content Ground Grid panel 2X4m (6.6X13.1ft) Notes Small color variations may occur due to lighting and individual perception; the actual product color prevails. Measurements may vary by 1 to 2 cm depending on measurement method; this variation is normal and not a quality defect. Customer Support 24hour customer support is available. For questions about the product or installation, please contact customer support through your channel.