Pre-crimped GH1.25 Cable Kit — 180 pcs (with heat shrink and tweezers) What this kit is 1.15 cm pre-crimped GH1.25 to GH1.25 cables — 180 pieces total (6 colors, 30 cables per color) Pin-count breakdown included: 2P × 20, 3P × 20, 4P × 20, 5P × 20, 6P × 20, 7P × 10, 8P × 10, 9P × 10 Heat shrink tubing (diameter 1 mm) — 100 pieces Tweezers — 1 piece Key benefits — why you need this kit Fast, reliable assembly: pre-crimped connectors let you build custom GH1.25 cables quickly by simply inserting the crimped pins into the housing — no soldering required for most jobs. Time and error reduction: color-coded wires and pre-crimped terminals reduce wiring mistakes and speed up harness assembly and repairs. Compact, flexible wiring: ultra-soft silicone wires remain highly flexible even at low temperatures, making them ideal for compact builds and installations where movement or vibration is present. Complete kit for field or bench work: large quantity of common pin counts, abundant heat shrink tubing, and a tweezers included so you have the basic tools to assemble and protect connections immediately. What it does and how it performs Function: provides ready-to-insert GH1.25 male/female cable assemblies for small-pitch JST-style connections commonly used on flight controllers and sensors. Size and material: 1.15 cm cable length (pre-crimped), wire diameter approx. 1 mm, ultra-soft silicone insulation for durability and cold-temperature flexibility. Durability: silicone insulation and secure crimp contacts minimize breakage from repeated bending and vibration. Compatibility Designed for direct use with common autopilot and flight controller hardware, including: Pixhawk 6C, Pixhawk 6X Pixhawk2 (The Cube) Pixhawk 4, Pixhawk 4 mini CUAV v5 Pixhack Emlid Edge Pixracer Mini Pixel DJI Inspire and Phantom flight controllers Typical use scenarios Building or repairing sensor and peripheral leads on a drone: quickly make direct GH1.25 cable runs for power, signal, and telemetry between flight controller and devices (ESC telemetry, GPS, compasses, rangefinders). Custom harnesses for compact builds: assemble short, color-coded cable sets to tidy wiring on small frames or housings where space and flexibility matter. Field repairs and prototyping: keep this kit on a workbench or in a field box to replace damaged plugs, swap pin counts, and protect connections with heat shrink on the spot. Kit highlights (quick reference) 180 pre-crimped GH1.25 cables (6 colors × 30 each) Multiple pin counts included for flexible harness assembly 1 mm heat shrink tubing — 100 pieces Tweezers for easy handling of crimps and pins Ultra-soft silicone wire for cold-temperature flexibility and vibration resistance Usage tips Insert the pre-crimped pin straight into the GH1.25 housing until it locks; confirm retention before applying power. Slide heat shrink over the joint and apply gentle heat to seal and insulate. Keep spare pins and housings on hand for reconfiguration and repairs. This kit offers a practical, ready-to-use collection of GH1.25 pre-crimped cables, heat shrink tubing, and a tweezers to streamline wiring for Pixhawk-family flight controllers and similar devices.