WaterPowered Generator with G1/2 Male Thread Options: 80V, 5V, 12V Color: Black Quantity: 1 Pc Product overview This compact waterdriven generator converts flowing water into electrical power for small electronics, LED lighting, and battery charging. It uses a G1/2 male thread connection for simple installation on compatible faucets or plumbing fittings. The unit is built with a corrosionresistant finish and a sturdy structure for reliable, portable use. Key benefits Generates usable electricity from water flow, enabling offgrid or accessory power without external mains. Three output options cover common needs: voltage raw output (80V), regulated 5V for USBtype devices, and regulated 12V for radios and LED lighting. Stable and quiet operation with mechanical noise kept to low levels during normal use. Simple installation via G1/2 male thread and versatile compatibility with faucets, showers, and water heating systems. How each output option works 80V type: Raw output up to 80V with no internal regulator. Output voltage is proportional to water pressure and can reach 80V at rated conditions. Suitable for directly powering 312V, 10W LED lights and for charging small batteries. Typical charging current is about 220 mA (measured at 12V). When charging a battery, the generator voltage will tend to settle near 14V so that generated power is used for charging. 5V type: Regulated 5V output for charging USB devices or for use with lithium battery charging management circuits. 12V type: Regulated 12V output for powering 12V radios, LED lighting, and other 12V accessories. Typical applications and scenarios Bathroom shower or intelligent faucet: Install on a shower or faucet line to power LED temperature indicators, small sensors, or control modules without external power. Outdoor or emergency lighting: Use the 80V or 12V option to drive LED lights or charge small batteries when mains power is unavailable. Small device charging and electronics: Use the 5V regulated version with a compatible charging management chip to charge mobile devices or power 5V electronics from water flow. Performance and durability highlights Output characteristics: For the unregulated 80V model, output voltage is proportional to water pressure. Low operational noise: mechanical noise <= 55 dB. Service life: expected >= 3000 hours under normal operating conditions. Corrosionresistant construction and scratchresistant finish for longterm reliability. Technical specifications Connection: G1/2 male thread Output options: 80V (unregulated), 5V (regulated), 12V (regulated) 80V rated condition: up to 80V output at 1.2 MPa Output current: >= 220 mA (at 12V) Line resistance: 10.5 +/ 0.5 ohm Insulation resistance: 10 megaohm (measured with DC100 megohmmeter) Outlet closed pressure: 0.6 MPa Maximum outlet pressure resistance: 1.2 MPa Starting water pressure: 0.05 MPa Recommended particle size for inlet: 0.21.0 mm Mechanical noise: <= 55 dB Generator life: >= 3000 hours Dimensions: approx. 8.8 x 1.7 x 5.8 x 3.9 cm (3.46 x 0.67 x 2.28 x 1.54 in) What is included One waterpowered generator unit (select 80V, 5V, or 12V model when ordering) Installation notes Fits standard G1/2 threaded plumbing fittings. Ensure the water line is of large debris and within the specified particle size range to avoid damage. For the 80V model, be aware that output voltage varies with water pressure and there is no internal regulation. Use appropriate external circuitry when connecting sensitive electronics or battery charging systems. This generator is designed for auxiliary power generation in faucets, shower systems, waterheated applications, and similar scenarios where water flow is available and small amounts of electrical power are needed.