Description Test Arrange : 30-200 AH (Ampere per Hour), 100-1100 CCA BT100 Support Functions 1. Battery Voltage Test 2. Battery CCA & AH Capacity Test 3. Battery Internal Resistance Test 4. Battery SOC & SOH Display 5. Battery Health Analyzer Battery Tester Results: GOOD BATTERY: The battery is in good condition. GOOD-RECHARGE: The battery is in good condition but low current. Fully charge the battery and return it to service. CHARGE & RETEST: Fully charge the battery and retest. Failure to fully charge the battery before testing may result in inaccurate results. If you still get CHARGE & RETEST message after you fully charge the battery, replace it. REPLACE BATTERY: The battery is almost dead or the connection between the battery and battery cable is poor. Replace the battery and retest; or disconnect the battery cables and retest the battery using the out-of-vehicle test before replacing it. BAD CELL-REPLACE: The battery may be damaged such as broken cell or short circuit. Replace the battery and retest. How To use bt100 test the battery 1. Press the ENTER button to start the test. BAT.LOCATION Menu will display. 2. Scroll with the UP or DOWN button to highlight OUT OF VEHICLE or lNVEHICLE from BATTERY LOCATION menu and press ENTER to selectthe battery location. 3. Scroll with the UP or DOWN button to select the battery type from BATTERY TYPE menu and press ENTER to confirm. 4. Scroll with the UP or DOWN button to select the battery standard from BATTERY STANDARD menu and press ENTER to confirm. Not all rating systems are available for each application. 5. Use UPor DOWN button to change measure range till you enter thecorrect range of your battery. Press ENTER to start the test. 6. View test results on the screen. Depending on battery status, one of thefollowing test results may display. Package Including: 1pc x FOXWELL BT100 12V Car Battery Tester 1pc x Test Cable 1pc x User Maunal