Flipsky ESC 75200 84V 200A High Current w/ Aluminum PCB for E-Foil Fighting Robot Surfboard AGV Robot RC Cars Parts Description: Specs: 1.Firmware:5.2, supports firmware upgrade 2.Voltage: 14-84V (safe for 4-20S) 3.Continuous Current: 50V/200A; 75V/150A (Values depend on the mounting, ambient temperature and air/water circulation around the device ); Burst: 300A 4.BEC:5V@1A 5.Support Modes:DC, BLDC, FOC (sinusoidal) 6.ERPM:150000 7.Communication Ports:USB, CAN, UART, SPI, IIC 8.Supported Sensors:ABI, HALL, AS5047, AS5048A 9.Input Source Support:PPM, ADC, NRF, UART 10.Supported Sensorless:Yes 11.Regenerative Capacity:Yes 12.Programmable via Software:Yes 13.Size:130x67.7x40.1mm(Including alu. case) 14.Motor/Power Wire Size:8 AWG 15:Online Manual Download,please Click Here Features: 1.Adjustable protection against: low voltage protection, high voltage protection, over current protection, temperature abnormal protection, mosfets / motor over temperature protection. 2.Support various control modes: Current / Duty cycle / Speed / PID control modes. 3.Support the function of balancing car by connecting the IMU module through the IIC interface; support inertial measurement unit modules such as MPU9250, MPU9150, MPU6050, LSM6DS3, BMI160. 4.CPU:STM32F405 with frequency 168MHz 5.Aluminum PCB with good heat dissipation to expand life span. 6.Two COMM ports: UART bluetooth module, screen display or remote controller supportable. Package Included: 1X ESC 75200 Wiring: