200W Flexible Solar Panel White A lightweight, portable 200W flexible solar panel designed for on the go charging and easy installation on curved or irregular surfaces. Built for outdoor use, it includes mounting grommets and MC4 connectors for simple setup and reliable connection to battery chargers and controllers. Key benefits Portable power wherever you need it: light weight and slim profile make it easy to carry and install on roofs, campers, boats, and vehicles. Flexible mounting options: four metal grommets allow hanging with hooks or securing with adhesive and climbing clips for fast, stable installation. Weather resistant for outdoor use: panel body rated IP67 and connectors/junction box rated IP68, plus 2400 Pa wind resistance and hail impact tolerance for continued operation in harsh conditions. Efficient conversion in a compact format: monocrystalline cells with a rated cell efficiency of 19.8 percent and a standard test condition power output of 200W. Fits irregular surfaces: maximum bendable angle up to 30 degrees for curved roofs, tents, and other nonflat installations. Technical highlights Maximum power Pmax: 200W (single panel), output tolerance ±3 percent Open circuit voltage Voc: 19.2 V to 36 V Typical operating voltage range: 16 V to 24 V Maximum system voltage: 700 V DC Cell efficiency: 19.8 percent Connector: MC4 Weight: 3.8 Kg Dimensions: 1060 x 277 x 5 mm Temperature operating range: 20 C to 80 C Voc temperature coefficient: 0.38 percent per C Power temperature coefficient: 0.47 percent per C Standard test conditions: irradiance 1000 W per m2, temperature 25 C, AM 1.5 Durability and construction Front laminate and thin profile provide good light transmittance and low overall thickness for easier installation in tight spaces. Back layer uses a TPT material for heat dissipation and temperature resistance. Mechanical strength rated for winds and snow loads with reinforced mounting points. What is included 200W Solar panel x 2 Crocodile clip cable x 1 40A controller x 1 Connectors x 4 Climbing clips x 4 Cables x 2 Extension cable x 1 Practical use scenarios Camping and RV power: Mount on a camper roof or tent to keep a battery bank charged for lights, refrigerators, and small appliances. Marine and vehicle charging: Attach to boat decks or vehicle rooftops to maintain battery charge during travel or while parked. Remote field work and outdoor operations: Use for charging batteries for tools, lighting, or communication equipment at construction sites, farms, or remote locations. Installation and care Ensure correct polarity before connecting to a charger or battery. Confirm positive to positive and negative to negative. Use the four metal grommets to hang or secure the panel. Climbing clips and included cables assist with quick setup. Place the panel in direct sunlight and keep the surface of scratches for charging performance. Do not scrape the panel surface with sharp objects. Safety and handling precautions Verify polarity and secure connections before use. Avoid scratching or damaging the panel surface. Place for maximum sunlight exposure while charging to ensure charge rate. This 200W flexible solar panel provides a practical, durable solution for off grid and mobile power needs, combining flexible installation, weather resistance, and reliable electrical performance.