The Fastheat milk heater combines a functional design with time and energy savings. Suitable for milk and feed that is prepared to heat up with water. Not suitable for other purposes, in particular preventing water from freezing in feeding troughs and heating aggressive liquids. With a capacity of only 1700 watts, this type has a significantly lower energy consumption compared to traditional milk heaters. Due to the patented design and the reduced height of the heating element, it is possible to heat small quantities without unnecessary energy loss. Fast and equal heating as the heated liquid rises to the surface while the cold liquid sinks to the bottom where it is reheated. From 18 °C to 42 °C in approx. 11 minutes (bucket with 8 liters of water). Features:• With a good temperature controller for easy operation with familiar ease of use• Very easy to clean due to the specially coated Teflon (PTFE) heating element.• Optical signal display, e.g. when the set temperature has been reached. • With practical handle • Total height of 81.5 cm • Very light, only 2.7 kg (approx. 25% lighter than standard models) • Equipped with 3 m connection cable Technical data: - Voltage: 230 V - Power: 1700 W - Safety class: IPX7 - Max. diameter heating element: 165 mm - Min. immersion depth: 80 mm - Max. immersion depth: 690 mm - Max. temperature: 90 °C.