Passive IP Network Coaxial Extender Pair Description Compact passive transmitters that carry real time digital network video over existing RG59 coaxial cable. Each pair extends 10/100 Mbps Ethernet signals up to 220 m, enabling direct replacement of traditional analog coax camera systems with HD IP cameras without rewiring. No external power required and built in surge guard adds protection against voltage spikes. Key benefits Reuse existing coaxial infrastructure to upgrade analog CCTV to HD IP cameras, reducing cable, labor, and installation time. Plug and play installation: passive design requires no external power. Connect one unit to the NVR and the other to the IP camera for immediate extension. Long reach: supports network transmission over RG59 coax up to 220 m for flexible camera placement. Network performance: supports 10/100 Mbps and complies with IEEE802.3 10baseT standards for standard network compatibility. Video system compatibility: works with PAL, NTSC, and SECAM video formats for broad CCTV system support. Built in surge protection helps maintain stable operation in environments prone to voltage spikes. Small footprint: compact size 2.0 x 6.7 x 1.8 cm keeps installation tidy and unobtrusive. Specifications Video formats: PAL, NTSC, SECAM Network standard: IEEE802.3 10baseT Network speed: 10/100 Mbps Maximum transmission distance: 220 m over RG59 coax Cable: RG59 coaxial cable Operating temperature: 20 to +70 C Storage temperature: 40 to +150 C Humidity: noncondensing, 0 to 95 percent Size (each unit, cable excluded): 2.0 x 6.7 x 1.8 cm Package weight: 49 g Package contents 1 pair passive IP network coaxial transmitter Typical use scenarios CCTV system upgrade: analog cameras with HD IP cameras without pulling Ethernet cable. Use the extender pair to send network signals over existing RG59 coax from cameras to the NVR. Remote camera placement: Install cameras in locations up to 220 m from the recorder, such as parking areas, building perimeters, or large warehouses, while keeping network cabling simple. Temporary or staged deployments: Ideal for sites where running Ethernet cable is impractical or during phased upgrades where existing coax remains in place. Notes Passive device requires one unit at each end of the coax run. Designed for use with RG59 coaxial cable and 10/100 Mbps network devices.