ETCR1860C 40V1KV High Voltage Alarm WristMounted NonContact Electric Alarm for Power Maintenance Item Type: High Voltage Alarm Material: ABS Model Alarm Distance ETCR1860 40V 5CM10CM15CM600V 40CM1KV60CMTechnical ParametersWorking Power Supply1XCR1632 button battery (not included) ETCR1860C: 40V-1KVTable Distance Error ±10cm (23℃±1℃, 80%RH under basic conditions)Working Frequency 50/60HZElectric Test Mode Non-contact modeDetection Mode Automatic triggerBattery LifeContinuous work (acousto-optic alarm): about 24 hours Standby time: about 12 monthsAlarm ModeIndicator light: LED visibility under 8000LX visible lightBuzzer: above 60dB (distance 60CM)Protection Grade IP54Working Environment -10℃-40℃; less than 80%RHStorage Environment -10℃-60℃; less than 70%RH How e: 1. The wrist alarm is not a voltage detector, and it is prohibited to be used as a voltage detector. 2. When using, please wear the alarm on the bare skin of your wrist and keep the watch case close to the skin. Make the triangular symbol on the surface of the alarm point point toward your fingertips. 3. This alarm only provides safety assistance measures, please do not overestimate the safety guarantee after wearing this alarm. 4. Near grounded metal structures (such as transformer), the working distance of the alarm will not decrease. 5. If the alarm is hung on the sleeve of work clothes or rubber gloves, the sensitivity will not decrease. 6. When the alarm clock gets wet in the rain, please take out the battery and dry it naturally in a cool place. Please do not use the alarm in a humid state, this time it will greatly shorten the working distance of the alarm, even the alarm will always sound an alarm. 7. If the siren is hit or hit by a strong external force, check the appearance of the siren and press the "TEST" key to test to ensure that the siren functions normally. 8. Please read the manual carefully after purchase.