Automatic Handheld Electric Strapping Tool Overview A portable, battery powered strapping tool that automatically tensions, welds, and cuts PP or PE straps for secure bundles. Designed for fast operation by operators of any skill level and for heavy duty packaging needs. Key benefits Fast and efficient operation: insert the strap, press the tension button, then press the welding switch. The tool automatically welds and cuts excess strap so bundles are secured in under one minute. degree of automation: simple controls and automatic weld and cut allow non professionals to achieve consistent results with minimal training. Strong tightening force: adjustable tension covers light to heavy duty applications, reducing the need for manual effort and multiple workers. Lightweight and portable: complete unit with battery weighs 6.6 lbs, enabling extended use and easy handling even by users with limited strength. Rechargeable and reliable: 3000 mAh lithium battery recharges in 90 minutes, provides about 2 hours of operation per charge and can be recharged up to 2000 times. Function and performance Works with PP and PE straps 13 to 16 mm wide and 0.4 to 1.2 mm thick. Adjustable pulling force range 60 to 2800 N via a simple knob to match strap type and load requirements. Automatic melting welding creates a clean joint and the tool trims excess strap during the same cycle for consistent, secure seals. Typical cycle time allows bundling of a pack of timber in less than 1 minute and up to 100 to 250 straps per battery charge depending on tension settings. How to use Feed strap around the package and insert strap ends into the tool. Press the tension button to tighten to the desired level. Press the welding switch to automatically weld and cut excess strap. Adjust the tension knob as needed for different strap materials or load sizes. Specifications Compatible strap types: PP and PE Strap width: 13 16 mm Strap thickness: 0.4 1.2 mm Pulling force: adjustable 60 2800 N Battery capacity: 3000 mAh rechargeable lithium Battery charge time: 90 minutes Operating time per charge: about 2 hours Straps per charge: approximately 100 250 depending on tension Battery recharge cycles: up to 2000 Weight with battery: 6.6 lbs Applications Timber bundling: secure stacks of lumber quickly on site or in a mill. Warehouse palletizing: strap boxes, cartons, and packed pallets for storage and transport. Construction materials: bind pipes, rebar, or building supplies for handling and shipment. Advantages in practice Saves time and labor by combining tensioning, welding, and cutting in one automated cycle. Reduces operator fatigue due to strong motorized tension and low unit weight. Versatile compatibility with common PP and PE strap sizes for industrial and commercial use. This tool provides a practical, portable solution for repetitive strapping tasks where speed, consistency, and secure sealing are required.