Color: 1*Battery Overview A cordless electric banding machine designed for fast, consistent plastic strapping of packages and bundles. Built from alloy steel and engineering plastics for durability, it combines automatic welding and cutting with digital controls to improve packaging speed and repeatability in a wide range of industries. Key benefits Speeds up packaging and reduces manual effort by automatically tensioning, welding, and cutting straps and closing the buckle in one operation. Typical strap cycle under one minute for common bundles. Precise, repeatable results using an LCD to set welding time and tension strength, and to monitor battery level and welding status. Portable and cordless for use anywhere. Rechargeable lithium battery supports multiple hours of outdoor work and hundreds of straps per charge. Rugged construction resists everyday wear and the front fixing point helps prevent slippage or strap disconnection during handling. Main features Automatic melt welding and cut: insert strap, press tension to tighten, then press welding switch to weld and cut excess strap automatically. Digital display adjustment: LCD lets you set welding time and tension strength and shows battery level and welding completion. Durable materials: alloy steel and engineering plastics for a practical, sturdy tool body. Front fixing point at the strap feed prevents packages from falling or the strap from disconnecting. Motor with nonnuclear rotor for stable operation, higher efficiency, and reduced energy use. Portable handle design and easy belt release for faster unloading and repositioning. Compatibility and operating limits Tape width: 13 to 16 mm Tape thickness: 0.4 to 1.2 mm Applicable tape types: PP and PET Sealing method: friction welding Bundling force: 900 to 3200 N Default factory setting configured for PET strapping. For PP use the cutter spring included in the accessory set. If strap is very thin, add a washer before use. Battery and performance Lithium battery: 4.0 A H Power and frequency: 75 W, 50/60 Hz Charging time: approximately 90 minutes Runtime: about 4 hours of outdoor use per full charge, with roughly 250 to 350 straps per charge depending on tension settings Recharge cycles: battery can be recharged up to 2000 times Physical specifications Weight: 3.6 kg Machine size: 38 x 13 x 13 cm (15 x 4.7 x 4.7 inches) Package contents 1 Electric beam machine 1 Accessory set 1/2 Battery Practical use scenarios Warehouse palletizing: quickly secure multiple boxes or cartons with PET strap for storage or shipment, reducing time spent on each pallet. Lumber or agricultural bales: tension and weld straps around bundles of lumber or bundled crops in the field without running cables. Textile and light industry packaging: apply consistent tension and welds to fabric rolls or bundled goods to improve packing uniformity and handling. Notes for operation The default setup suits PET straps. Before using PP straps, the cutter spring from the accessory set. Use washers if straps are thinner than recommended to ensure proper cutting and sealing. Adjust welding time and tension on the LCD to match strap material and bundle requirements. Aftersales If you have questions or need support, contact the seller and expect a reply within 24 hours.