Automatic Melting Strapping Tool for PP and PE Straps A portable, battery powered electric strapping tool that tensions, welds, and trims straps automatically. Designed for fast, repeatable bundling and heavy duty packaging with minimal training. Key benefits Automates the full cycle: insert strap, press the tension button, then press the welding switch. The tool automatically welds and cuts off excess strap for a secure finish. Saves time and labor: tightening speed and automatic welding reduce cycle time. Typical bundling of timber can be completed in less than one minute. Easy to use: degree of automation lets non professionals achieve consistent results. Large tightening force handles heavy duty applications while the device remains simple to operate. Lightweight and portable: machine plus battery weighs 6.6 lbs, allowing single person operation and comfortable use over extended periods. Main features and specifications Compatible strap types: PP and PE belts, 1316 mm (0.510.63 inch) wide and 0.51.2 mm (0.020.04 inch) thick. Adjustable tension: manual knob allows setting the pulling force; maximum adjustable pulling force 2800 N. Automatic melting weld and cut: after tensioning, the welding switch activates an automatic weld and the tool trims the excess strap. Power and runtime: includes two 4000 mAh rechargeable lithium batteries. Each battery can be recharged up to 2000 times. Charging and output: full charge in 90 minutes. On a full charge the tool runs approximately 2 hours and can strap about 250 to 350 belts, depending on strap size and tension setting. Practical applications Timber bundling on site or in a yard: fast, secure bundling of lumber for storage or transport, completing individual bundles in under one minute. Warehouse and palletizing: efficient closing and securing of pallet loads and grouped cartons where speed and repeatable strap tension matter. Construction and outdoor packaging: battery powered operation enables use in field environments for securing materials, equipment, or temporary shipments. What makes it stand out Combines strong tensioning capability with automatic welding and trimming for a complete, one handed workflow. Lightweight design and long life battery system support mobile use and daily output without frequent downtime. Adjustable tension control provides flexibility for different strap widths and thicknesses and for varying load requirements. Operation summary Insert strap into the baler, press the tension button to tighten, then press the welding switch. The tool will weld and cut off excess strap automatically. Adjust the tension knob to set the desired pulling force up to 2800 N. This electric strapping tool is suited for industrial, warehouse, and field use where reliable, repeatable, and portable strap sealing is required.