Compact, batterypowered automatic strapping tool that tensions, welds, and cuts PP and PE straps for fast, secure packaging and bundling. Key benefits Fully automatic weld and cut: Insert the strap, press the tension button, then the welding switch. The tool automatically welds the strap and cuts off excess for a clean, secure finish. Easy for any operator: degree of automation and large tightening force make professional results possible for nonprofessionals. The complete tool with battery weighs 6.6 lbs, so it is easy to handle even for users with limited strength. Saves time and labor: Rapid operation lets a single operator bundle materials quickly. Typical timber bundles can be strapped in under 1 minute. Adjustable tension for different loads: Manual tension knob lets you set pulling force from 900 to 3200 N to match light to heavyduty packaging needs. Portable, longlasting battery: Builtin 4000 mAh rechargeable lithium battery recharges in about 90 minutes, provides roughly 2 hours of continuous use, and can perform about 250 to 350 straps per full charge. Battery rated for up to 2000 recharge cycles. Key specifications and compatibility Compatible strap type: PP and PE belts Strap width: 11 to 16 mm Strap thickness: 0.4 to 1.2 mm Adjustable tension range: 900 to 3200 N Battery: 4000 mAh rechargeable lithium, 90 minute charge time, 2 hours runtime, 250 to 350 straps per charge Weight with battery: 6.6 lbs How it solves common packaging problems Eliminates manual knotting or metal seals by welding and trimming straps automatically for consistent, strong seals. Reduces labor and speeds workflows by combining tensioning, welding, and cutting in one handheld tool. Adapts to different strap sizes and tension needs, so one tool works across a variety of loads and materials. Typical applications Bundling timber and lumber for storage or transport. Securing palletized cartons, boxes, or bundled goods in warehousing and logistics. Fastening construction materials such as pipes, rebar, or bundled insulation on site. Basic use steps 1. Position and wrap the strap around the load and feed it into the tool. 2. Press the tension button to tighten to the desired tension. 3. Press the welding switch; the tool will weld and automatically cut the excess strap. 4. Adjust the tension knob as needed for different loads. What makes this product stand out True handheld portability with a lightweight design and longlasting rechargeable battery. Wide adjustable tension range for reliable sealing of both light and heavy loads. Simple, repeatable workflow that reduces training time and increases packaging throughput. This tool is suitable for production, warehouse, construction, and agricultural settings where fast, repeatable, and reliable strapping is needed.