Automatic melting handheld strapping machine for fast, secure plastic banding. Insert the strap, press the tension button to tighten, then press the welding switch. The tool automatically welds and cuts off excess strap, producing strong, consistent seals in seconds. Key benefits Fast and efficient operation: Tighten, weld, and cut in a single automated cycle, allowing one operator to complete a strap in seconds. Typical timber bundles can be strapped in under one minute. Easy for nonprofessionals: degree of automation and simple controls make packaging tasks easy to learn and perform. Lightweight and portable: Tool plus battery weighs about 6.6 lbs, suitable for outdoor and overhead work and easy to handle by operators with limited strength. Powerful and adjustable tension: Adjustable pulling force from 60 to 2800 N via a manual knob to match light to heavy duty applications. Long lasting battery performance: Builtin 3000 mAh rechargeable lithium battery supports about 100 to 250 straps per full charge. Recharge in approximately 90 minutes for up to 2 hours of operation. Battery rated for about 2000 recharge cycles. Compatibility and specifications Strap type: Designed for PP and PE straps. Strap width: 13 to 16 mm. Strap thickness: 0.4 to 1.2 mm (approximately 0.01 to 0.04 inch). Weight: Approximately 6.6 lbs including battery. Controls: Tension button and welding switch plus adjustable tension knob. How it works 1. Insert strap into the machine. 2. Press the tension button to tighten to the set force. 3. Press the welding switch; the unit performs automatic melting weld and cuts off excess strap. Practical applications Timber and lumber yards: Fast bundling of boards, planks, and joists for storage or transport. Warehousing and palletizing: Secure pallet loads and heavy cartons where consistent strap tension is required. Construction and landscaping sites: Portable strapping for bundles of rebar, pipes, insulation, or bundled plant material. This handheld electric strapping tool combines portability, adjustable tension, and automatic welding to speed up packaging while keeping straps secure and consistent.