Automatic Electric Handheld Strapping Machine Key benefits Fast, consistent strapping: insert the strap, press the tension button, then press the welding switch. The tool automatically melts the strap, welds the joint, and cuts off excess for a secure finish in seconds. tightening force with simple controls: adjustable tension knob lets you set pulling force up to 2800N for reliable heavy duty packaging. Easy to use for any operator: degree of automation means nonprofessionals can pack as easily as professionals. The total weight with battery is 6.6 lbs, making the tool easy to handle for users with limited strength. Portable and ready for field work: rechargeable battery power lets you work anywhere without a power cord. One full charge supports continuous outdoor use for about 2 hours and can complete roughly 250 to 350 straps. Main features and specifications Compatible strap types: PP and PE belts, 13 to 16 mm width (0.51 to 0.63 inch), thickness 0.5 to 1.2 mm (0.02 to 0.04 inch). Tension capacity: adjustable up to 2800N via manual knob. Battery system: two rechargeable lithium batteries, 4000 mAh each. Each battery can be recharged up to 2000 cycles. Full charge time approximately 90 minutes. Portability: total tool weight with battery approximately 6.6 lbs. Operation: automatic melt welding and cutting after tensioning; simple threestep workflow for fast packaging. How it solves common packaging problems Reduces manual labor: replaces time consuming manual strapping methods and reduces the physical effort required to secure heavy loads. Improves speed and consistency: automatic welding and cutting eliminate inconsistent seals and speed up throughput in packing operations. Works off grid: rechargeable battery power removes the need for an external power source during outdoor or on site jobs. Typical use scenarios Timber and lumber yards: bundle boards and planks quickly and securely for storage or transport; a single operator can strap a pack of timber in under one minute. Warehousing and palletizing: secure boxes or bundled items on pallets for shipment, improving packing speed during peak operations. Construction and industrial sites: strap together rebar, pipe, or other long materials on site without needing power outlets. Practical notes Use only PP or PE straps within the specified width and thickness range for reliable welding results. Adjust the tension knob to match load requirements and material properties. Charge both batteries before extended use. Expect about 250 to 350 straps per full charge under typical conditions. This tool is designed for fast, repeatable strapping tasks where portability, strong tension, and automated welding are required.