Automatic Melting Handheld Strapping Machine A portable, rechargeable strapping tool that tensions, melts welds, and trims PP and PE straps automatically for fast, secure bundling. Key benefits Fully automatic welding and cutting: insert the strap, press the tension button, then press the welding switch. The tool welds the strap and cuts off excess automatically for a clean, reliable joint. Fast and efficient: large tightening force and quick cycle time allow users to bundle a pack of timber in under one minute, saving time and reducing labor. Easy to use: degree of automation makes it suitable for nonprofessionals and professionals alike. The unit plus battery weighs 6.6 lbs, so users with limited strength can operate it comfortably. Adjustable tension: manual knob lets you set the pulling force up to 2800 N to match different loads and strap conditions. Rechargeable and portable: dual 4000 mAh rechargeable lithium batteries, each rated for about 2000 charge cycles. A 90 minute charge provides up to 2 hours of operation and about 250 to 350 straps per full charge. Features and specifications Strap compatibility: PP and PE straps, 13 to 16 mm wide (0.51 to 0.63 inch) and 0.5 to 1.2 mm thick (0.02 to 0.04 inch). Power: two 4000 mAh batteries included for sustained portable use. Tension force: adjustable up to 2800 N via manual knob. Weight: approximately 6.6 lbs including battery for handheld operation. Operation: automatic tensioning, melting weld, and automatic cutting of excess strap. Typical applications Timber and lumber yards: quickly bundle boards and timber for storage or transport. Warehousing and distribution: secure boxes, cartons, and pallet loads for shipment. Construction sites and manufacturing: fast, repeatable strapping of materials and components where portability is required. How to use (brief) 1. Thread the strap into the tool. 2. Press the tension button to tighten to the desired level. 3. Press the welding switch. The tool will weld and cut off the excess automatically. This handheld strapping machine is designed for reliable, repeatable packaging tasks that require portable operation, adjustable tension control, and automated welding and cutting for a clean finish.