CJX28011 8001 LC1 contactor for 3phase control. This 3P+1NO 1NC AC contactor is designed for DIN rail mounting and 50 Hz operation. It is supplied as a No Coil Voltage unit (coil not included), with coil voltage options available separately to suit your control circuit. The device is rated for 8.0 A and is compatible with earth leakage protection and related control schemes in threephase systems. Color code: 8011. Key benefits Compact DIN rail mount for easy panel integration and space savings in control cabinets. 3pole main contacts with 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, enabling straightforward motor control and logic wiring. No coil voltage included, allowing you to select the appropriate coil voltage for your control circuit (options typically include 24 V, 110 V, 220 V, and 380 V variants). Robust AC operation at 50 Hz suitable for a wide range of threephase loads. Clear, reliable switching for threephase motors and related equipment, with a design aligned to LC1/ CJX2 contactor families. Key attributes Model and type: CJX28011, 8001 LC1 contactor family Poles and contacts: 3 poles (3P) with 3 main contacts; 1 normally open (NO) auxiliary contact; 1 normally closed (NC) auxiliary contact Coil voltage: No coil voltage (coil not included); compatible with standard coil voltage variants (e.g., 24 V, 110 V, 220 V, 380 V) as required Current rating: 8.0 A Frequency: 50 Hz Mounting: DIN rail mounted Applications: suitable for 3phase motor control and related switching in electrical panels Color: 8011 Applications and use cases Case 1: Start and stop control for a 3phase motor in a compact packaging line. The 3P main contacts handle the motor load while the NO/NC auxiliary contacts provide appropriate feedback or interlock signals for control logic. Case 2: Pump and valve control in a small water treatment or processing system. DIN rail mounting supports neat panel layout, and the auxiliary contacts enable interlocks and status signaling for safety circuits. Case 3: Conveyor or fan motor control in an industrial HVAC or material handling setup. The unit's 8.0 A rating covers mediumduty loads, with easy integration into protection and automation schemes that rely on reliable 3phase switching. Notes on selection and installation This unit is supplied without a coil (No Coil Voltage). Choose the appropriate coil voltage variant to match your control circuit and install accordingly. Ensure the DIN rail mounting complies with your panel size and that the coil voltage and main circuit ratings match your application requirements. Use the 3P main contacts to switch threephase loads and utilize the 1 NO and 1 NC auxiliary contacts for signaling or interlocking as part of your control logic. Verify compatibility with any earth leakage protection or related safety circuits in your installation.