説明
E5 SilentFlo drive unit E5-PXXFDNNN (39W, 100-240V, replaceable) for spas
This is a drive unit (motor) for E5 Silenflo pumps. Very easy to replace the dive unit: just rolls of the union fixing the drive unit of old pump (pump house stays fixed in on the spa), disconnect the electrical cables and connect them to the new drive unit as it was, put the new drive unit into the old pump house and fix it by the union. Repair work done
Drive unit delivered with union but without cableOld part number: LHB08110018, LHB08110012, 74050, 34-158-1250 (Horizon) _Technical informations:Connection: nonWeight: 0,4 kgDimensions: 85mm x 60 mmSpeed: fix 24h, Power: max 39W House: N/AProtection: NoMax Pressure: 2 barMax flow: 950l/hMax head: N/A Current: 100 - 230V (50/60Hz)Rotation: N/AElectrical connector: without cable, use the cable of the old pumpCable: noNoise: less than 50 db
-
Fruugo ID:
268801657-594786160
-
EAN:
5999087803442
製品安全情報
以下に概説するこの製品に固有の製品安全性情報を参照してください。
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
安全上の警告:
Pump should only be used with liquids compatible with pump component materials. Do not use to pump flammable or explosive fluids such as gasoline, fuel oil, kerosene, etc. Do not use in flammable and/or explosive atmospheres
For your protection always wear proper clothing, eye protection, etc. in case of any malfunction. Failure to comply with this warning may result in personal injury and/or property damage.
Ensure that the power source conforms to the requirements of your equipment.
Disconnect power before servicing. If the power disconnect is out of sight, lock in the open position and tag it to prevent unexpected application of power. Failure to do so may result in a fatal electric shock!
Release all pressure within the system before servicing any component. Drain liquids from the system before servicing.
Make workshop childproof with padlocks, master switches and by removing starter keys.
When wiring an electrically driven pump follow all electrical and safety codes, as well as the most recent European or United States National Electrical Code (NEC) and the Occupational Safety and Health Act (OSHA). The pump should be connected by a qualified electrician.
Protect electrical cord from sharp objects, hot surfaces, oil, and chemicals. Avoid kinking the cord. Replace or repair damaged or worn cords immediately.
Do not handle a pump or pump motor with wet hands or when standing on a wet or damp surface or in water.
