This 12V to 7.5V DCDC Buck Converter Module provides a compact and reliable way to power 7.5V devices from higher voltage sources. It accepts input in the 10V to 36V range and delivers up to 2A of regulated output current, making it suitable for a wide range of automotive, industrial, and hobby projects. Key Benefits Stable 7.5V output from 10V–36V input sources, enabling devices that require a fixed 7.5V supply. Up to 2A continuous output current to support a variety of loads such as microcontrollers, sensors, and small display modules. Compact, boardmountable module that simplifies integration into equipment, enclosures, or prototypes. Efficient stepdown operation that minimizes heat compared to linear regulators when operating from higher input voltages. Built to provide dependable performance in projects with changing input voltages, typical of automotive and solar/battery systems. Key Attributes Functionality: DCDC buck converter module with a fixed 7.5V output and 10V–36V input range; capable of supplying up to 2A. Compatibility: Suitable for powering devices that require 7.5V from highervoltage sources such as vehicle power rails, battery packs, solar arrays, and other 10–36V supplies. Size/Form Factor: Compact module designed for easy integration into existing systems and hobby projects; intended for boardlevel mounting. Material/Construction: Built as a standard DCDC converter module using common electronic components on a compact PCB; designed for reliable performance in typical operating environments. Performance: Delivers regulated 7.5V output at up to 2A from an input between 10 and 36V, suitable for a range of low to midpower loads. Applications and Use Cases Automotive or vehicle electronics: Convert 12V or higher vehicle electrical systems to a stable 7.5V supply for dashboards, sensors, or auxiliary devices. Robotics and automation projects: Power 7.5V microcontrollers, sensors, actuators, or small displays from battery packs or power supplies in the 10–36V range. Industrial or hobby electronics: Use with solar panels, power adapters, or battery banks to run 7.5V devices such as control boards, instrumentation, or portable equipment. How to Use Connect the input terminals to a power source within the 10V–36V range, observing correct polarity. Connect the load to the 7.5V output terminals, sharing a common ground with the input as required. Do not exceed the 2A output current rating to maintain reliable operation and avoid overheating. Notes This is a fixedoutput buck converter module producing 7.5V from highervoltage inputs; no additional output adjustments are described. For results, ensure the input source can supply sufficient current for the load plus converter efficiency losses, and observe correct polarity when wiring.