The DCDC Boost Converter 9V20V Input to 48V 1.5A Output in a Medium Case is designed to generate a 48V rail from a lower voltage source. It is intended for battery and communication systems that require a stable 48V supply from a 9 to 20V input. Key benefits Enables a 48V load to run from common 920V power sources, expanding how and where you can deploy 48V devices. Compact medium case provides a balance between protection and space efficiency for space constrained installations. Facilitates integration with existing battery and communication system architectures by providing a straightforward boost path to 48V. Suitable for mobile, field, and benchtop environments where a portable 48V boost solution is advantageous. Key attributes Functionality: DCDC boost conversion from 920V input to 48V output Output rating: 48V at up to 1.5A Input range: 9V to 20V Case: Medium case enclosure Compatibility: Intended for battery and communication systems requiring a 48V rail Material: Not specified Performance notes: Output current and voltage are defined as 48V at 1.5A maximum Using scenarios Powering 48V telecom or network interface equipment from a portable battery pack or vehicle supply that provides 920V, enabling remote or mobile deployments without a dedicated 48V source. Supplying a 48V subsystem or module in a field service or remote monitoring setup where space is limited and a compact boost solution is beneficial. Laboratory or test bench applications where 48V equipment must be tested using a readily available 920V power source, simplifying power rails for experimental setups.