Cord Boot Protector Rubber Cable Sleeve Protects cable ends from bending and twisting where the cord meets the tool or machine. Made of flexible rubber, this cord boot improves cable longevity by reducing wear from rubbing, sharp edges, and repeated movement. Key benefits Prevents cable breakage and twisting at the entry and exit points of equipment. Reduces strain and bending on power cords to extend cable life. Flexible rubber construction conforms to the cable while providing durable protection. Easy to install at the cable inlet and outlet of tool housings or machine casings. Features Material: rubber Size: approx 68 x 20 x 9 mm (2.7 x 0.8 x 0.4 inch) Single protector included per package Typical applications Power tools: install at the cord entry on angle grinders, sanders, or circular saws to prevent fraying. Electric drills: protect the cord where it meets the drill housing from repeated bending. Cutting machines and workshop equipment: use at cable inlets and outlets to reduce wear in use environments. Installation guidance Place the protector around the cable at the point where it enters or exits the equipment housing. Ensure the cord boot fits the cable diameter and the machine opening for protection. Select the appropriate size cord boot to achieve the strain relief and protection. Package contents 1 x Cord Boot Protector Notes Size is approximate. Please allow 1 to 3 cm variance due to manual measurement. Actual color may vary slightly from the photos due to monitor differences.