Category 6 UTP Ethernet Patch Cable — PVC jacket · 4‑pair twisted · Stranded CCA · Molded strain relief · 568B Key benefits - Reliable device connections: Designed to connect Ethernet equipment and network devices using the industry standard 568B wiring scheme. - Durable, flexible construction: PVC outer jacket and molded strain relief protect the cable and connector interface from wear, bending and pull stress. - Clear signal pair design: 4 twisted pairs (unshielded twisted pair, UTP) reduce internal crosstalk between pairs for stable data transmission. - Cost-conscious conductor: Stranded Copper-Clad Aluminum (CCA) conductors offer a lighter-weight, lower-cost alternative to solid copper while remaining suitable for patching and device-to-device cabling. - Ready for standard installations: Terminated to the 568B pinout to match common networking patch panels, switches, routers and NICs. What it is and how it works - Category 6 specification: Constructed to meet Category 6 cable design conventions, with 4 twisted pairs organized for Ethernet networking. - Unshielded twisted pair (UTP): No additional shielding; twisting of pairs controls interference within the cable. - PVC jacket: Provides insulation, abrasion resistance and general-purpose protection for indoor installations. - Molded strain relief: Reinforced connector housing reduces stress at the termination point to extend cable life in frequent-move or tight-bend situations. - Stranded CCA conductor: Stranded construction improves flexibility compared with solid conductors, making the cable easier to route and reposition. Compatibility and applications - Compatible with standard 8P8C (RJ45) Ethernet ports wired to the 568B pinout. - Intended for patching, device-to-device connections and desktop cabling where flexible stranded conductors and molded strain relief are beneficial. Practical use scenarios - Home office or gaming setup: Connect a PC, gaming console or set-top box to a router or switch for a stable wired connection with flexible routing behind desks and entertainment centers. - Small office patching: Use as a patch cord between switches, patch panels and wall jacks in an office rack where frequent reconfiguration or movement occurs. - Network device hookups: Link printers, IP phones, access points or other network devices to a switch or router where a durable PVC jacket and strain-relieved termination reduce wear from repeated plugging and bending. Technical highlights (as supplied) - Category: 6 - Cable type: UTP (unshielded twisted pair) - Pairs: 4 twisted pairs - Conductor: Stranded Copper-Clad Aluminum (CCA) - Jacket: PVC - Termination: 568B wiring scheme - Connector protection: Molded strain relief Installation notes - Designed primarily for patching and device-to-device connections. Use appropriate cable management to avoid sharp bends and excessive pulling on the molded strain relief. - Confirm CCA conductor suitability for your application if strict solid-copper requirements are specified for longer permanent links or specific power-over-Ethernet (PoE) installations.